Changes

ADAS Integration on platfroms (view source)

Revision as of 12:46, 23 September 2022

1,353 bytes removed , 12:46, 23 September 2022

no edit summary

Line 7: Line 7:

In this chapter, we will show you how to configure the device and also how to configure the Wialon platform for receiving information from ADAS.

−

~~== Configurator set-up instructions for Spec ID on FMX640 ==~~

−

'''It is important to note that ONLY specific ADAS cameras starting with the Serial Number S/N: 9C can be connected and used with FMX640 devices. Cameras starting with different S/N numbers for example; 9B, are currently not supported.'''

−

Base firmware version of the device will not have the ability to connect ADAS through RS235 connection, it has to be activated using special(spec) firmware. If you want to remove spec ID, you need to install '''FMX64.Ver.01.02.10.Rev.103_ID1''' firmware, after that you can install spec '''ID1039''' firmware.

−

~~To use firmware '''FMX64.Ver.01.02.10.Rev.103_ID1039''' which has spec ID a spec key is required to be inserted into the configurator '''Teltonika.Configurator_1.7.40_B.FM64_R.55'''~~

−

~~To do that please go to Teltonika configurator window and press '''Ctrl+Alt+I''' on your keyboard.~~

−

~~Copy the key:~~

−

~~'''jXIEpOLMg6bIyPDZdpIpKgSVCTVdvLyNEua76CNP2TQAAADTTaD1uQ/FhdhfRCCi7PRdtlSutkbDlC9c1UejUWUUSo5bwNhCHG5N'''~~

−

~~'''GCdn8Qh/DhVppOsbSfH/9Y+8SjUHbqvVNBlKZw9LTIT4nveAKc3ODwy7aumxvQoZEynV9+B44ucUIzDJk9WLVfQfjr54+4O747drg4m'''~~

−

~~'''/HxoTFGoGg0GuLi7UKFsERiVClqT+b2Qh30L3hBgwgwqxjoUABAAAAAAACIsf'''~~

−

~~to “New key” section and press Register. If everything is OK, you will see new device added on the left side.~~

−

~~After that you can use ADAS on FMX640~~

== Device configuration ==

Edgar.dementenko

Administrators

1,606

edits