35
edits
Changes
FMB225 I/O settings (view source)
Revision as of 14:03, 26 September 2022
, 14:03, 26 September 2022no edit summary
LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device using configurator, LLS sensor ID will be entered automatically.<br>
LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device using configurator, LLS sensor ID will be entered automatically.<br>
Up to 16 LLS sensors are supported with <b>03.28.XX</b> firmware version.
Up to 16 LLS sensors are supported with <b>03.28.XX</b> firmware version.
Up to 8 passenger counter sensors "PP-01" can be connected each requiring 2 LLS addresses. The passenger counter sensor "PP-01" provides the possibility to count passengers getting either on or off public transport (bus, trolleybus, etc.).
[[Category:FMB225 Configuration]]
[[Category:FMB225 Configuration]]
