0
edits
Changes
no edit summary
[[Image:Data_protocol.gif|300px]]
[[Image:Data_protocol.gif|300px]]
*In '''RS232\RS485''' settings under '''RS232 Settings''' navigate to '''COM1 settings''' and in '''Mode''' parameter selection, open the drop-down menu and select '''DSM''', please also keep the baudrate set to default which is '''115200'''
[[File:Dsm rs232.gif]]
*Make sure to change '''DSM I/O''' feature '''Priorities''' to ''Low, High or Panic'' (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: '''Yawning - Low priority - Low/High level 0 - Operand On Exit'''. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server.
*Make sure to change '''DSM I/O''' feature '''Priorities''' to ''Low, High or Panic'' (Based on your needs). Also set operand and low/high settings in order to receive events based on specific conditions, e.g.: '''Yawning - Low priority - Low/High level 0 - Operand On Exit'''. This would mean that if the person yawns, the camera will detect this scenario, the parameter level will jump from 0 to 1 and will exit the configured high level which is set on exit. This will generate an event and send it to the configured server.
[[File:Dsm io.gif]]
[[File:Dsm io.gif]]
