Changes

5.      Wake up the device - for example, by applying a card to it.

5.      Wake up the device - for example, by applying a card to it.

6.      Select the device from the list (long press), then select Update firmware from the drop-down menu and press the Start button.

6.      Select the device from the list, then select Update firmware from the drop-down menu and press the Start button.

[[File:NBL conf9.jpg.jpg|frameless|520x520px]]  [[File:NBL conf8.jpg.jpg|frameless|519x519px]]

[[File:NBL conf9.jpg.jpg|frameless|520x520px]]  [[File:NBL conf8.jpg.jpg|frameless|519x519px]]

'''2.    Power OFF /Reset to default settings'''

'''2.    Power OFF /Reset to default settings'''

To set factory defaults and un-pairingboth buttons must be pressed for 5 seconds additionally button 1 (blue) must be pressed first. It is also factory/transport configuration.

To set factory defaults and unpairing both buttons must be pressed for 5 seconds additionally button 1 (blue) must be pressed first. It is also factory/transport configuration.

Procedure:

Procedure:

# Press Button 2 and hold

# Press Button 2 and hold

# Keep the button pressed for 5 seconds

# Keep the button pressed for 5 seconds

# The PowerOnwillbe signaledby flashing LED1 and LED2

# The Power On will be signaled by flashing LED1 and LED2