Changes

==Installation==

==Installation==

To connect the DualCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.

To connect the DualCam to a supported device, you have to make sure to connect 4 PINs of the camera to the PINs of your device correctly.

[[File:443035 Teltonika DualCam Wiki Knowledge Base Teltonika GPS 1.2.jpg|frameless|928x928px]]

[[File:443035 Teltonika DualCam Wiki Knowledge Base Teltonika GPS 1.2.jpg|frameless|928x928px]]

If you need to receive additional data from the DualCam when the ignition is off, you can do it by connecting the camera to a power source using the relay, to control the power supply by turning on/off the camera.. Hot to configurate DOUT please visit [https://wiki.teltonika-gps.com/view/FMB_setdigout FMB DOUT]

=== Connection of Dualcam to vehicle via DOUT1 ===

Connection to vehicle can be achived by connecting the Dualcam's ground cable to the DOUT1 of the FMx125 device. This will in turn control the state of Dualcam and give the user control of it by enabling or disabling it using 'setdigout 1' commands or by connecting a button to it. More about the configuration of this scenario can be read in the [[DualCam Configuration#Camera control using DOUT1|Dualcam Configuration]] page.

[[File:DOUT1 CONTROL.jpg|left|frameless|1000x1000px]]

 

 

 

 

 

 

 

 

 

 

 

 

 

{| class="wikitable"

{| class="wikitable"

|+

|+

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NUMBER

! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NUMBER

! style="width:15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NAME

! style="width:15%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |PIN NAME