| Line 33: |
Line 33: |
| | The main solution in this case is the automatic charging of traffic in the IoT platform. If the Truphone SIM card is not installed from the factory, then [https://wiki.teltonika-gps.com/view/FMB130_First_Start#How_to_insert_Micro-SIM_card install it yourself]. | | The main solution in this case is the automatic charging of traffic in the IoT platform. If the Truphone SIM card is not installed from the factory, then [https://wiki.teltonika-gps.com/view/FMB130_First_Start#How_to_insert_Micro-SIM_card install it yourself]. |
| | | | |
| − | To have a working solution it’s important to properly wire the devices. In the picture below it's shown how to correctly wire the devices.
| |
| − |
| |
| − | [[File:Can-control_connection_example_updated.png|alt=|middle|frameless|1100x357px]]
| |
| − |
| |
| − | During installation please follow recommendations in order to '''avoid damaging''' device and vehicle:
| |
| − |
| |
| − | *Wires should be connected while the module is '''not plugged''' in.
| |
| − | *Be sure that after the car computer falls asleep, power is still available on the chosen wire. Depending on the car, this may happen in a 5 to 30 minutes period.
| |
| − | *When the module is connected, be sure to measure the voltage again if it did not decrease.
| |
| − | *The ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.<br>
| |
| | | | |
| | ==Configuration== | | ==Configuration== |
| Line 51: |
Line 41: |
| | ====1.2. Understanding of possible [https://wiki.teltonika-gps.com/view/FMB130_Sleep_modes Sleep modes].==== | | ====1.2. Understanding of possible [https://wiki.teltonika-gps.com/view/FMB130_Sleep_modes Sleep modes].==== |
| | ==='''2. Car sharing configuration:'''=== | | ==='''2. Car sharing configuration:'''=== |
| − | [[File:GPRS settings.png|alt=|left|thumb|258x258px]]
| + | 1. Open the IoT Platform at https://account.truphone.com/login and log in. |
| − | | |
| − | Parameter ID – Parameter name GPRS settings:
| |
| − | | |
| − | <br />
| |
| − | | |
| − | *<span style="background-color:#91b9d4;">2001</span> – APN
| |
| − | *<span style="background-color:#91d4b9;">2002</span> – APN username (if there are no APN username, empty field should be left)
| |
| − | *<span style="background-color:#b991d4;">2003</span> – APN password (if there are no APN password, empty field should be left)
| |
| − | | |
| − | [[File:SERVER settings.png|alt=|left|thumb|259x259px]]
| |
| − | | |
| − | | |
| − | | |
| − | <br />Server settings:
| |
| − | | |
| − | *<span style="background-color:#b9d491;">2004</span> – Domain
| |
| − | *<span style="background-color:#d491b9;">2005</span> – Port
| |
| − | *<span style="background-color:#d4b991;">2006</span> – Data sending protocol (0 – TCP, 1 – UDP)
| |
| − | | |
| − | <br />
| |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | After successful GPRS/SERVER settings configuration, FMB130 device will '''synchronize time''' and '''update records''' to '''the configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[FMB130 Parameter list|SMS parameters]].<br />
| |
| − | [[File:Online_deep_sleep_carsharing.PNG|alt=|left|thumb]]
| |
| − | | |
| − | | |
| − | Sleep settings:
| |
| − | <br />
| |
| − | *<span style="background:#05CC6F">102</span> – Sleep settings(0 – Disable, 1 – Gps sleep, 2 – Deep sleep, 3 – Online Deep sleep, 4 – Ultra sleep)
| |
| − | '''Note''': This scenario will not work with [[FMB130 Sleep modes#Deep%20Sleep%20mode|Deep Sleep]] and [[FMB130 Sleep modes#Ultra%20Deep%20Sleep%20mode|Ultra Sleep]] modes, since they disable the device's GSM module to save power.
| |
| − | | |
| − | | |
| − | | |
| − | [[File:Can adapter settings carsharing solution.JPG|alt=|left|frame]]
| |
| − | <br />
| |
| − | <br />
| |
| − | <br />
| |
| − | <br />
| |
| − | Can adapter settings:
| |
| − | | |
| − | *<span style="background-color:#E18DE7;">45002</span> – CAN Adapter program number (This code is written in every connection diagram and it is specific for every vehicle model and make year)
| |
| − | | |
| − | [[File:Can_adapter_door_status_settings.PNG|alt=|left|455x455px|thumb]]
| |
| − | <br />
| |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | *<span style="background-color:#dee11d;">45170</span> – Door status, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic )
| |
| − | | |
| − | [[File:Can_adapter_fuel_level_settings.PNG|alt=|left|453x453px|thumb]]
| |
| − | <br />
| |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | *<span style="background-color:#1de1d2;">45130</span> – Fuel level, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic )
| |
| − | | |
| − | [[File:Can_adapter_settings_total_milage_counted.PNG|alt=|left|452x452px|thumb]]
| |
| − | <br />
| |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | *<span style="background-color:#e1701d;">45220</span> – Total milage (Counted), Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic )
| |
| − | | |
| − | [[File:Sec_state_flag_P2.PNG|alt=|left|453x453px|thumb]]
| |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| − | | |
| | | | |
| | + | 2. Navigate to the "Rules" menu and add a new Usage rule (Please refer to Picture 1) |
| | + | [[File:AutoTopUp1.jpg|thumb|none|Picture 1. '''Rules menu'''|link=Special:FilePath/AutoTopUp1.jpg]] |
| | | | |
| | + | 3. In the "Label" window enter Your preferred name. To distinguish different rules, in this example name is "Auto Top Up" (Please refer to Picture 2) |
| | + | [[File:AutoTopUp2.jpg|thumb|none|Picture 2. '''Label'''|link=Special:FilePath/AutoTopUp2.jpg]] |
| | | | |
| | + | 4. In the "Rule Triggers" select the following settings (Please refer to Picture 3): |
| | | | |
| − | *<span style="background-color:#bce5d7;">45430</span> – Security State Flags, Priority "Low" (0 – Disabled 1 – Low 2 – High 3 – Panic ) | + | * When — Data Usage. |
| − | <br />
| + | * Of — Each SIM Card. |
| − | <br />
| + | * Is greater than — In this example value is 490 MB, but it can be customized according to Your needs. |
| − | <br />
| + | * Over the — Current Rate Plan |
| | + | * Country/Network — Any Country/Network |
| | + | [[File:AutoTopUp3.jpg|thumb|none|Picture 3. '''Rule Triggers'''|link=Special:FilePath/AutoTopUp3.jpg]] |
| | | | |
| − | <br />
| + | 5. In SIM Card(s) window select "All SIM Cards" (Please refer to Picture 4) |
| − | '''Quickstart:''' From default configuration to Car sharing solution in one SMS: | + | [[File:AutoTopUp5.jpg|thumb|none|Picture 4. '''SIM Card(s)'''|link=Special:FilePath/AutoTopUp5.jpg]] |
| − | " setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_user;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0;<span style="background:#05CC6F">102</span>:3;<span style="background:#E18DE7">45002</span>:ProgramNumber;<span style="background-color:#dee11d;">45170</span>:1;<span style="background-color:#1de1d2;">45130</span>:1;<span style="background-color:#e1701d;">45220</span>:1;<span style="background-color:#bce5d7;">45430</span>:1"
| |
| − | This SMS will set up your device to report the Car Sharing scenario to the server and the possibility for remote control of vehicle components.
| |
| | | | |
| − | '''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS \ Call settings. | + | 6. In the Actions window select the rate plan that will be applied to the SIM card and <b>Uncheck</b> "Change next billing cycle" (Please refer to Picture 5) |
| | + | [[File:AutoTopUp6.jpg|thumb|none|Picture 6. '''Actions'''|link=Special:FilePath/AutoTopUp6.jpg]] |
| | | | |
| | + | 7. Select an email where the notification will be sent (Please refer to Picture 6) |
| | + | [[File:AutoTopUp7.jpg|thumb|none|Picture 7. '''Notifications'''|link=Special:FilePath/AutoTopUp7.jpg]] |
| | ==Parsing information== | | ==Parsing information== |
| | | | |