0
edits
Changes
→PC Calibration
==PC Calibration==
==PC Calibration==
Driver Setup (ONLY SUPPORTS WINDOWS OS)
* NOTE: Before you connect or start calibration, please install RNDIS driver first. LINK: http://movon.co.kr/downloads/rndisdriver.zip (Windows 10)
* Unzip the file and remember the unzipped folder location.
* Go to the Device manager and select '''a USB serial Port (COM x)''' under '''Ports (COM & LPT)'''. [[File:Rndis.png|left|450x450px]]
* Click it using the right button of your mouse, then click “Properties”. [[File:Rndis1.png|left|450x450px]]
* Click on "Update driver..."[[File:Rndis2.png|left|450x450px]]
* Select “Browse my computer for driver software”.[[File:Rndis3.png|left|450x450px]]
* Click “Browser…” button and “Browse For Folder” window will pop up. Find rndisdriver and choose it ('''remember the path to where you saved it''').[[File:Rndis4.png|left|450x450px]]
* Press “Next” on the page below.[[File:Rndis5.png|left|450x450px]]
* The driver should now be installed and visible in device manager:[[File:Rndis6.png|left]]
==== Calibration Setup ====
[[File:DSM_Calib.png | right | 320x320px]]
[[File:DSM_Calib.png | right | 320x320px]]
* Access DSM Calibration page via PC
* Access DSM Calibration page via PC
** Connect DSM to PC using USB Tipe-C cable with 5 pins.
** Connect DSM to PC using USB Tipe-C cable with 5 pins.
