6,023
edits
Changes
mLine 25:
Line 25: − +
→{{{model|FMB6YX}}} device configuration
Users must select [[Codec#Codec 8 Extended|Codec8 Extended]] data type in order to get Mobileye data packets to the server because [[{{{model|FMB6YX}}} AVL ID#Mobileye elements|Mobileye I/O AVL ID]]’s are over than 255. This is because of [[Codec#Codec 8 Extended|Codec8 Extended]] can sent 2 bytes data of AVL ID while [[Codec#Codec 8|Codec8]] – 1 byte. This parameter is located in configurator [[{{{model|FMB6YX}}} System settings|System tab]], Protocol Settings.
Users must select [[Codec#Codec 8 Extended|Codec8 Extended]] data type in order to get Mobileye data packets to the server because [[{{{model|FMB6YX}}} Teltonika_Data_Sending_Parameters_ID#Mobileye_elements|Mobileye I/O AVL ID]]’s are over than 255. This is because of [[Codec#Codec 8 Extended|Codec8 Extended]] can sent 2 bytes data of AVL ID while [[Codec#Codec 8|Codec8]] – 1 byte. This parameter is located in configurator [[{{{model|FMB6YX}}} System settings|System tab]], Protocol Settings.
When [[Codec#Codec 8 Extended|Codec8 Extended]] type is selected [[{{{model|FMB6YX}}} AVL ID#Mobileye elements|Mobileye I/O]] elements could be selected.
When [[Codec#Codec 8 Extended|Codec8 Extended]] type is selected [[{{{model|FMB6YX}}} AVL ID#Mobileye elements|Mobileye I/O]] elements could be selected.
