Changes

You need to connect this CAN bus interface to Mobileye CAN-A channel dedicated CAN bus interface for {{{model|FMB6YX}}}. In Mobileye 5 the CAN-A Channel is accessible for physical connection using the CAN-AM Male connector, (6 Pins connector labeled “EyeCAN”) in the Mobileye 5 main harness.  

You need to connect this CAN bus interface to Mobileye CAN-A channel dedicated CAN bus interface for {{{model|FMB6YX}}}. In Mobileye 5 the CAN-A Channel is accessible for physical connection using the CAN-AM Male connector, (6 Pins connector labeled “EyeCAN”) in the Mobileye 5 main harness.  

[[File:{{{model|FMB6YX}}-Mobileye-scheme.png|800x800px]]

[[File:{{{model|FMB6YX}}}-Mobileye-scheme.png|800x800px]]

{{{model|FMB6YX}}} device CAN1 H signal must be connected to “EyeCAN” PIN1 and CAN1 L to PIN2. Please take a note that connectors for FMS devices (in this case {{{model|FMB6YX}}}) are not supplied. This connection cable should be provided for {{{model|FMB6YX}}} CAN1 connection with Mobileye 5 “EyeCAN” port. <br> <br>

{{{model|FMB6YX}}} device CAN1 H signal must be connected to “EyeCAN” PIN1 and CAN1 L to PIN2. Please take a note that connectors for FMS devices (in this case {{{model|FMB6YX}}}) are not supplied. This connection cable should be provided for {{{model|FMB6YX}}} CAN1 connection with Mobileye 5 “EyeCAN” port. <br> <br>