Changes

Template:Bluetooth 4.0 settings (view source)

Revision as of 08:35, 27 March 2023

1,789 bytes added ,  08:35, 27 March 2023
no edit summary
Line 83: Line 83:  
*[[How to read data from TZ-BT04/05/05B sensor with TMT250 device | How to read data from TZ-BT04/05/05B sensor with Teltonika device]]
 
*[[How to read data from TZ-BT04/05/05B sensor with TMT250 device | How to read data from TZ-BT04/05/05B sensor with Teltonika device]]
 
*[[How to read data from BLE Sensors]]
 
*[[How to read data from BLE Sensors]]
 +
 +
===Supported Sensors List===
 +
 +
 +
This list shows the supported BLE sensors and where their Presets can be found in the configurator to use those sensors with FMB devices. The prests and sensors have been fully tested by Teltonika and are confirmed to work properly.
 +
 +
While following the steps showed in the images below, you can find the supported sensors in our Configurator.
 +
 +
In the Configurator, find the Bluetooth 4.0 Settings menu, select the advanced sensors mode which was mentioned before. The following window should appear.
 +
[[Image:Preset1.png|1200px|none]]
 +
 +
 +
At the top right corner, you should see the following '''Buttons''', press on the first one from the left.
 +
[[Image:Preset2.png|200px|none]]
 +
 +
After the named '''Button''' was pressed the list with all supported sensors and the configuration presets should appear.
 +
[[Image:Preset3.png|150px|none]]
 +
 +
 +
Select your sensor and click load. The correct configuration and recommended settings will appear in the configuration.
 +
[[Image:Preset4.png|1200px|none]]
 +
 +
The supported sensors are listed below:
 +
*[https://wiki.teltonika-gps.com/view/EYE_SENSOR_/_BTSMP1 EYE Sensor]
 +
*BLE TPMS -Tire Pressure Monitoring System.
 +
*Efento Humidity BLE sensors (version 2.2 and 4 presets)
 +
*ELA ANG (Angle)
 +
*ELA MOV AG (Movement and Angle)
 +
*ELA PUCK ID (ID)
 +
*ELA RHT (Temperature and Humidity)
 +
*ELA T (Temperature)
 +
*ELA MOV MAG (Movement Magnetic)
 +
*Escort Fuel BLE sensors
 +
*Escort luminosity BLE sensors
 +
*Escort Temperature BLE sensors
 +
*S1 BLE Motion, Humidity and Temperature Sensors
 +
*Technoton Wireless fuel level sensors
 +
*TZ-BT04 Temperature and Humidity Sensors
 +
*TZ-BT05 Temperature and Humidity Sensors
 +
 +
[https://wiki.teltonika-gps.com/view/How_to_add_a_BLE_preset_to_the_configurator Save your own settings as a preset/delete the preset]
Martyna.D
0

edits

Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/82085"

Navigation menu