Changes

System settings have 9 configurable parameters:

System settings have 9 configurable parameters:

* ''Sleep Settings'', where user can choose sleep mode;

* ''Sleep Settings'', where user can choose sleep mode;

* ''Ignition Source'', where user can choose between power voltage, digital input 1, accelerometer and engine RPM as ignition sources. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as ignition source. Ignition status is governed by the following functionalities: power manager, eco driving, excessive idling, fuel consumption, over speeding, towing and trip functionalities.

* ''Ignition Source'', where user can choose between power voltage, digital input 1, accelerometer and engine RPM as ignition sources. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as ignition source. Ignition status is used in power management and the following functionalities: eco driving, excessive idling, fuel consumption, over speeding, towing and trip functionalities.

* Object Motion Detection Settings, where user can configure 4 ways how FMB120 will detect stopped movement, and change its working mode (for working modes, read section [[FMB120 Data acquisition settings|Data acquisition settings]]). Other functionalities that depend from movement source: power manager, fuel consumption and trip.

* Object Motion Detection Settings, where user can configure 4 ways how FMB120 detects movement, and change its working mode (for working modes, read section [[FMB120 Data acquisition settings|Data acquisition settings]]). Other functionalities that depend from movement source: power manager, fuel consumption and trip.

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose what source is used (movement or ignition) to activate/deactivate static navigation.

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose what source is used (movement or ignition) to activate/deactivate static navigation.

* Records Settings, where user can enable or disable records when GPS is not available (no time synchronization).

* Records Settings, where user can enable or disable records when GPS is not available (no time synchronization).

* ''GNSS Source'' settings, where user can choose the necessary satellite system.

* ''GNSS Source'' settings, where user can choose the necessary satellite system.

* ''LED Indication'', where user can turn on or off indication LEDs.

* ''LED Indication'', where user can turn on or off the indication LEDs.

* ''Battery Charge Mode'', where user can choose when battery will be charged: <span style=color:#F6A83E>On Need</span> (battery will be charged anytime when it need to be charged) and <span style=color:#F6A83E>After Ignition ON</span> (battery will be charged only when ignition is on).

* ''Battery Charge Mode'', where user can choose when battery will be charged: <span style=color:#F6A83E>On Need</span> (battery will be charged anytime when it needs to be charged) and <span style=color:#F6A83E>After Ignition ON</span> (battery will be charged only when ignition is on).

* ''Analog Input Value Range'', where user can choose analog input range of 10 V or 30 V (currently 10 V is in fact a 30 V range).

* ''Analog Input Value Range'', where user can choose analog input range of 10 V or 30 V (currently 10 V is in fact a 30 V range).

* ''Time Synchronization'' settings, where user can choose which source(s) to use for FMB120 time synchronization. User has a choice to use only one synchronization source <span style=color:#F6A83E>Disable (GPS only)</span>, allow synchronization from both the GNSS and NTP server (<span style=color:#F6A83E>NTP</span>), select synchronization through GNSS and GSM operator (<span style=color:#F6A83E>NITZ</span>) or from all three sources (when <span style=color:#F6A83E>NITZ+NTP</span> is selected). User can select which NTP server (it is possible to configure up to two servers) and what time period to use to resynchronize time.

* ''Time Synchronization'' settings, where user can choose which source(s) to use for FMB120 time synchronization. User has a choice to use only one synchronization source <span style=color:#F6A83E>Disable (GPS only)</span>, allow synchronization from both the GNSS and NTP server (<span style=color:#F6A83E>NTP</span>), select synchronization through GNSS and GSM operator (<span style=color:#F6A83E>NITZ</span>) or from all three sources (when <span style=color:#F6A83E>NITZ+NTP</span> is selected). User can select which NTP server (it is possible to configure up to two servers) and what time period to use to resynchronize time.