0
edits
Changes
Created page with "==Status Info== Status info enables the user to monitor real time information of TAT140. Following fields are displayed: <b> * Device Info * GNSS Info * GSM Info * I/O Info..."
==Status Info==
Status info enables the user to monitor real time information of TAT140.
Following fields are displayed:
<b>
* Device Info
* GNSS Info
* GSM Info
* I/O Info
* Maintenance
</b>
<br>
User is able to export all of the information to <b>.HTML</b> file using [[File:Export_html.png|15px|link=]] icon which is at the top right corner of the <b>Device Info</b> area.
[[Image:TAT140 Main Status.png|center|800px]]
==Device Info==
[[Image:TAT140 Device Info.png|frame|right|800px]]
*Device Name
*BlueNRG and Modem firmware version
*Last Start Time - last device start time.
*Power Voltage (mV)
*RTC Time - real time clock or current device time.
*External Storage (used/total) - Internal Flash memory free space.
*Device IMEI
*Battery Voltage (mV)
*Device Uptime – device uptime from last start time.
==GNSS Info==
[[Image:TAT GNSS info.png|frame|right|800px]]
*GNSS status
**Module status – ON
**GNSS packets – the amount of GNSS packets device received from startup.
**Fix Status – Fix/No Fix.
**Fix Time – the last GNSS fix time.
*Location
**Latitude/Longitude – shows current device coordinates and if you press them opens Object location window with map.
**Altitude, Angle
**HDOP, PDOP
**Speed - current device speed.
*Satellites
**Visible – the amount and type of satellites that are visible.
**In Use – the amount of satellites used for location positioning.
==GSM Info==
[[Image:TAT_GSM_info.png|frame|right|400px]]
*GSM status
**Modem Status
**SIM State – Ready/Unknown
**GPRS Status – Activated/Deactivated
**Actual Operator Code
**Signal Level
*GPRS traffic
**Sent Data – the amount of data that has been sent by device.
**Received Data – the amount of data that has been received by device.
**Total Traffic – Sent Data + Received Data
*Sockets information:
**Type – AVL Data Sending
**Socket – Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
*Records
**Sent Records count – how many records were sent to the server since last data reset.
**Last Record Send – date and time when the last record was sent.
**Last Server Response Time – date and time when the last server response was.
*SMS Count
**Received SMS – the amount of SMS messages device has received.
**Sent SMS – the amount of SMS responses that were sent from the device.
**SMS Count – Received SMS + Sent SMS
==I/O Info==
*I/O Data - shows the current values from all configurable I/O elements.
[[Image:TAT_IO_info.png|frame|center|800px]]
==Maintenance==
[[Image:TAT_Maitenance.png|frame|right]]
*Log/Dump
**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|X}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
**Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|X}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
**Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
* Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
[[Category:TAT140 Configuration]]
Status info enables the user to monitor real time information of TAT140.
Following fields are displayed:
<b>
* Device Info
* GNSS Info
* GSM Info
* I/O Info
* Maintenance
</b>
<br>
User is able to export all of the information to <b>.HTML</b> file using [[File:Export_html.png|15px|link=]] icon which is at the top right corner of the <b>Device Info</b> area.
[[Image:TAT140 Main Status.png|center|800px]]
==Device Info==
[[Image:TAT140 Device Info.png|frame|right|800px]]
*Device Name
*BlueNRG and Modem firmware version
*Last Start Time - last device start time.
*Power Voltage (mV)
*RTC Time - real time clock or current device time.
*External Storage (used/total) - Internal Flash memory free space.
*Device IMEI
*Battery Voltage (mV)
*Device Uptime – device uptime from last start time.
==GNSS Info==
[[Image:TAT GNSS info.png|frame|right|800px]]
*GNSS status
**Module status – ON
**GNSS packets – the amount of GNSS packets device received from startup.
**Fix Status – Fix/No Fix.
**Fix Time – the last GNSS fix time.
*Location
**Latitude/Longitude – shows current device coordinates and if you press them opens Object location window with map.
**Altitude, Angle
**HDOP, PDOP
**Speed - current device speed.
*Satellites
**Visible – the amount and type of satellites that are visible.
**In Use – the amount of satellites used for location positioning.
==GSM Info==
[[Image:TAT_GSM_info.png|frame|right|400px]]
*GSM status
**Modem Status
**SIM State – Ready/Unknown
**GPRS Status – Activated/Deactivated
**Actual Operator Code
**Signal Level
*GPRS traffic
**Sent Data – the amount of data that has been sent by device.
**Received Data – the amount of data that has been received by device.
**Total Traffic – Sent Data + Received Data
*Sockets information:
**Type – AVL Data Sending
**Socket – Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
*Records
**Sent Records count – how many records were sent to the server since last data reset.
**Last Record Send – date and time when the last record was sent.
**Last Server Response Time – date and time when the last server response was.
*SMS Count
**Received SMS – the amount of SMS messages device has received.
**Sent SMS – the amount of SMS responses that were sent from the device.
**SMS Count – Received SMS + Sent SMS
==I/O Info==
*I/O Data - shows the current values from all configurable I/O elements.
[[Image:TAT_IO_info.png|frame|center|800px]]
==Maintenance==
[[Image:TAT_Maitenance.png|frame|right]]
*Log/Dump
**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|X}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
**Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|X}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
**Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
* Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
[[Category:TAT140 Configuration]]
