Changes

* ''Sleep Settings'', where user can choose sleep mode;

* ''Sleep Settings'', where user can choose sleep mode;

* ''Ignition Source'', where user can choose between power voltage, digital input 1, accelerometer and engine RPM as ignition sources. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as ignition source. Ignition status is used in power management and the following functionalities:  eco driving, excessive idling, fuel consumption, over speeding, towing and trip functionalities.

* ''Ignition Source'', where user can choose between power voltage, digital input 1, accelerometer and engine RPM as ignition sources. More than one ignition source can be selected at the same moment. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as ignition source. Ignition status is used in power management and the following functionalities:  eco driving, excessive idling, fuel consumption, over speeding, towing and trip functionalities.

* Object Motion Detection Settings, where user can configure 4 ways how {{{model|FMB1YX}}} detects movement, and change its working mode (for working modes, read section [[{{{model}}} Data acquisition settings|Data acquisition settings]]). Other functionalities that depend from movement source: power manager, fuel consumption and trip.

* Object Motion Detection Settings, where user can configure 4 ways how {{{model|FMB1YX}}} detects movement, and change its working mode (for working modes, read section [[{{model}} Data acquisition settings|Data acquisition settings]]). Other functionalities that depend from movement source: power manager, fuel consumption and trip.

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose what source is used (movement or ignition) to activate/deactivate static navigation.

* ''Static Navigation Settings'', where user can turn static navigation on or off. Additionally, user can choose what source is used (movement or ignition) to activate/deactivate static navigation.

* Records Settings, where user can enable or disable records when GPS is not available (no time synchronization).

* Records Settings, where user can enable or disable records when GPS is not available (no time synchronization).