0
edits
Changes
How to use Solebe Y905 Bluetooth® lock with TST100 (view source)
Revision as of 12:30, 14 April 2023
, 12:30, 14 April 2023Created page with "__TOC__ ==How to use Solebe Y905 Bluetooth lock with TST100== <br /> *'''Enable''' Bluetooth in your device's configuration and '''save''' your configuration to device:<br />..."
__TOC__
==How to use Solebe Y905 Bluetooth lock with TST100==
<br />
*'''Enable''' Bluetooth in your device's configuration and '''save''' your configuration to device:<br />
[[Image:Enable Bluetooth Settings.png]]
<br />
*Find out your Bluetooth lock MAC address:
[[Image:BLE Lock MAC location.jpg.png|300px]]
<br />
*When you have discovered your lock's MAC address, navigate to ''Bluetooth 4.0'' panel and click ''Discover BLE'' button. The lock's MAC address should appear in the ''Discovered BLE Devices'' list. '''Keep in mind that the first 4 digits of the MAC address are not shown.''' If the lock's MAC address does not appear in the list, reboot the device and scan again:
[[Image:Discover the lock.png]]
<br />
*If the lock was discovered, navigate to ''Status -> Lock'' panel and '''enable''' lock functionality:
[[Image:Enabling the lock.png]]
<br />
*After enabling the lock's functionality, '''select''' ''Solebe electronics'', '''enter''' lock's ''MAC address'' <u>without the first 4 digits</u> and '''click''' ''Connect''. If connection was successful, the following message will appear:
[[Image:Connect to lock.png]] [[Image:Successfully connected.png]]
<br />
*Upon successful connection, you will able to ''see and update'' the status of your Bluetooth lock - ''Unlock'' or ''Change lock's password''. '''There are two ways to unlock the lock''': <br />
1. By clicking '''Unlock''' button [[Image:Unlock button.png]]<br />
2. By sending SMS/GPRS command: '''btlock_unlock'''
[[File:VID 20200603 134232.mp4|1500px]]
<br />
*'''Two ways of <u>changing lock's password</u>:'''<br />
1. By clicking '''Change password''' button [[Image:Change password button.png]] <br />
2. By sending SMS/GPRS command: '''btlock_changepw:<Current password> <New password>'''
<br />
*'''Two ways of <u>checking lock's status and battery level</u>:'''<br />
1. By clicking '''Update Status''' button [[Image:Update status button.png]] <br />
2. By navigating to I/O panel and finding '''BLE Lock status''' (Parameter's ID 52640) and '''BLE Lock Battery''' (Parameter's ID 52650):
[[Image:IO status2.png]]<br />
Updating the status of the lock by clicking ''Update Status'' button takes a few seconds. If the button is not clicked - the status will be periodically updated every 5 minutes.
==How to configure Solebe Y905 Bluetooth lock via SMS commands==
In order to configure and control BT lock remotely these steps should be followed :
#Enable the BT by sending the SMS command: <code> <space><space>setparam<space>800:2</code> <br>0-Disable; 1-Enable(hidden) 2- Enable(visable)<br>
#Enable the Lock by sending the SMS command: <code><space><space>setparam<space>305:1</code><br>0-Disabled; 1-Enabled<br>
#Enable the LockType by sending the SMS command:<code> <space><space>setparam<space>303:1</code><br> 0-None; 1-Solebe electronics<br>
#Enable the Lock MAC address by sending the SMS command: <code> <space><space>setparam<space>304:<your BT lock's MAC address></code><br>12numbers, ex:F830022F272E<br>
Also all the commands can be send as one SMS: <code><space><space>setparam<space>800:2;305:1;303:1;304:F830022F272E </code>
Now the lock is configured, and the command <i>btlock_unlock</i> can be send.
<b>NOTE</b>: If in SMS/Call settings Section, SMS Commands block, the Login and Password are set, instead of spaces these should be used. Example, "name pass setparam 800:2".
[[Category: TST100 FAQ]]
==How to use Solebe Y905 Bluetooth lock with TST100==
<br />
*'''Enable''' Bluetooth in your device's configuration and '''save''' your configuration to device:<br />
[[Image:Enable Bluetooth Settings.png]]
<br />
*Find out your Bluetooth lock MAC address:
[[Image:BLE Lock MAC location.jpg.png|300px]]
<br />
*When you have discovered your lock's MAC address, navigate to ''Bluetooth 4.0'' panel and click ''Discover BLE'' button. The lock's MAC address should appear in the ''Discovered BLE Devices'' list. '''Keep in mind that the first 4 digits of the MAC address are not shown.''' If the lock's MAC address does not appear in the list, reboot the device and scan again:
[[Image:Discover the lock.png]]
<br />
*If the lock was discovered, navigate to ''Status -> Lock'' panel and '''enable''' lock functionality:
[[Image:Enabling the lock.png]]
<br />
*After enabling the lock's functionality, '''select''' ''Solebe electronics'', '''enter''' lock's ''MAC address'' <u>without the first 4 digits</u> and '''click''' ''Connect''. If connection was successful, the following message will appear:
[[Image:Connect to lock.png]] [[Image:Successfully connected.png]]
<br />
*Upon successful connection, you will able to ''see and update'' the status of your Bluetooth lock - ''Unlock'' or ''Change lock's password''. '''There are two ways to unlock the lock''': <br />
1. By clicking '''Unlock''' button [[Image:Unlock button.png]]<br />
2. By sending SMS/GPRS command: '''btlock_unlock'''
[[File:VID 20200603 134232.mp4|1500px]]
<br />
*'''Two ways of <u>changing lock's password</u>:'''<br />
1. By clicking '''Change password''' button [[Image:Change password button.png]] <br />
2. By sending SMS/GPRS command: '''btlock_changepw:<Current password> <New password>'''
<br />
*'''Two ways of <u>checking lock's status and battery level</u>:'''<br />
1. By clicking '''Update Status''' button [[Image:Update status button.png]] <br />
2. By navigating to I/O panel and finding '''BLE Lock status''' (Parameter's ID 52640) and '''BLE Lock Battery''' (Parameter's ID 52650):
[[Image:IO status2.png]]<br />
Updating the status of the lock by clicking ''Update Status'' button takes a few seconds. If the button is not clicked - the status will be periodically updated every 5 minutes.
==How to configure Solebe Y905 Bluetooth lock via SMS commands==
In order to configure and control BT lock remotely these steps should be followed :
#Enable the BT by sending the SMS command: <code> <space><space>setparam<space>800:2</code> <br>0-Disable; 1-Enable(hidden) 2- Enable(visable)<br>
#Enable the Lock by sending the SMS command: <code><space><space>setparam<space>305:1</code><br>0-Disabled; 1-Enabled<br>
#Enable the LockType by sending the SMS command:<code> <space><space>setparam<space>303:1</code><br> 0-None; 1-Solebe electronics<br>
#Enable the Lock MAC address by sending the SMS command: <code> <space><space>setparam<space>304:<your BT lock's MAC address></code><br>12numbers, ex:F830022F272E<br>
Also all the commands can be send as one SMS: <code><space><space>setparam<space>800:2;305:1;303:1;304:F830022F272E </code>
Now the lock is configured, and the command <i>btlock_unlock</i> can be send.
<b>NOTE</b>: If in SMS/Call settings Section, SMS Commands block, the Login and Password are set, instead of spaces these should be used. Example, "name pass setparam 800:2".
[[Category: TST100 FAQ]]
