420
edits
Changes
no edit summary
<b>On Move periodic tracking</b> enable or disable periodic data sending when device is On Move. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 1.<br>
<b>On Move periodic tracking</b> enable or disable periodic data sending when device is On Move. Device will generate and send normal record with event ID 0 and movement AVL ID 240 with a value of 1.<br>
<b>On Move event record</b> enable or disable record sending when device switches tracking scenario from On Stop to On Move. To trigger this event <b>On Move detection time</b> (see Record timestamp shift) timer needs to reach set value. Once event is triggered device will wake up and will trigger one of two records:<br>
<b>On Move event record</b> enable or disable record sending when device switches tracking scenario from On Stop to On Move. To trigger this event <b>On Move detection time</b> (see Record timestamp shift) timer needs to reach set value. Once event is triggered device will wake up and will trigger one of two records:<br>
1 - if last record did not have a GNSS fix, GNSS module will be turned on and fix obtained.<br>
1 - if last record did not have a GNSS fix, GNSS module will be turned on and fix obtained.<br>
2 - if last record had a valid GNSS fix, GNSS module will not be turned on and record will contain last good coordinates.<br>
2 - if last record had a valid GNSS fix, GNSS module will not be turned on and record will contain last good coordinates.<br>
Record will have AVL event 240 with a value of 5 that means "Movement event - On Move" in both cases.<br>
Record will have AVL event 240 with a value of 5 that means "Movement event - On Move" in both cases.<br>
<b>On Moving (s)</b> time period between records when device is working in On Move scenario.<br>
<b>On Moving (s)</b> time period between records when device is working in On Move scenario.<br>
7. Device is looking for GPS Fix (can take up to 3 min., depends on the environment)<br>
7. Device is looking for GPS Fix (can take up to 3 min., depends on the environment)<br>
8. Device saves record to memory and tries to send it via GPRS (can take up to 2 min., depends on the environment)<br>
8. Device saves record to memory and tries to send it via GPRS (can take up to 2 min., depends on the environment)<br>
9. Device goes to sleep for 28800 s.<br>
9. Device goes to sleep for 28800 seconds.<br>
10. If device was stationary for 600 seconds during On Move scenario device switches to On Stop scenario.<br>
10. If device was stationary for 600 seconds during On Move scenario device switches to On Stop scenario.<br>
10.1 If <b>On Stop event record</b> is <b>Disabled</b> device does not generate a new record and starts On Stop scenario timer.<br>
10.1 If <b>On Stop event record</b> is <b>Disabled</b> device does not generate a new record and starts On Stop scenario timer.<br>
10.2 If <b>On Stop event record</b> is <b>Enabled</b> device will wake up, obtain and send new position (GPS fix - up to 3 minutes, record saved, sent via GPRS - up to 2 minutes)<br>
10.2 If <b>On Stop event record</b> is <b>Enabled</b> device will wake up, obtain and send new position (GPS fix - up to 3 minutes, record saved, sent via GPRS - up to 2 minutes)<br>
11. Device goes to sleep for 28800 seconds, see step 1.<br>
|}
|}
