6,023
edits
Changes
How to connect Bluetooth® Hands Free adapter to Teltonika device (view source)
Revision as of 11:30, 22 May 2023
, 11:30, 22 May 2023Created page with "==How to connect Bluetooth Hands Free adapter to Teltonika device== ===Solution applies for these Teltonika devices=== TMT250 | GH5200 | TFT100 {{{pic_bt_settings|..."
==How to connect Bluetooth Hands Free adapter to Teltonika device==
===Solution applies for these Teltonika devices===
[[TMT250]] | [[GH5200]] | [[TFT100]]
{{{pic_bt_settings|[[Image:GH5200_Bluetooth_settings.png|thumb|right|Bluetooth settings]]}}}{{{pic_inc_call|[[Image:GH5200_Incoming_Call_Action_settings.png|thumb|right|Incoming Call Action settings under SMS/Call Settings]]}}}
===Bluetooth settings configuration===
These are instructions on how to easily create a connection between a Bluetooth Hands Free device and Teltonika device. First the device Bluetooth settings need to be configured. These are the required steps:
*Press <span>Bluetooth</span> settings (position 1).
*Turn on BT Radio by pressing <span>Enable (visible)</span> (position 2). ''Local name'' (position 3) will be "DeviceName%imeiX" by default, which can be changed.
*Set ''Security Mode'' (position 4) to <span>PIN only</span> or <span>None</span>. <span>PIN + MAC list</span> or <span>MAC list only</span> security modes could also be selected, but in that case external device MAC address is required to be entered to ''Authorized Devices MAC List'' (position 7).
*Set connection mode to <span>Hands Free</span> (position 5).
*Set ''External Name'' (position 6) as your hands-free device name for proper identification. In the given example hands-free headset name is "DM" because at least 2 characters are required to recognize it and connect to it. For better and quicker adapter identification on the network you could enter a full device name. You could check your hands-free adapter Bluetooth name by scanning nearby Bluetooth devices using a mobile phone or a computer with Bluetooth adapter.
*Go to <span>SMS/Call Settings</span> in main menu and set ''Incoming Call Action'' to <span>Do Nothing</span> as shown on next figure.
*After all these steps press <span>Save to device</span> to save configuration.
*Now the device can be disconnected from the configurator.
===Connecting Bluetooth Hands Free adapter===
----Turn on hands-free device and then turn on its Bluetooth connection for pairing following your model instructions. Hands-free adapter should make a specific sound in the speakers or its LED identification should inform about a successful connection. To check if the adapter is successfully connected, dial the device phone number and the hands-free device should start ringing. If you later restart the device it will automatically reconnect to this adapter.
[[Category: General Technical Questions]]
===Solution applies for these Teltonika devices===
[[TMT250]] | [[GH5200]] | [[TFT100]]
{{{pic_bt_settings|[[Image:GH5200_Bluetooth_settings.png|thumb|right|Bluetooth settings]]}}}{{{pic_inc_call|[[Image:GH5200_Incoming_Call_Action_settings.png|thumb|right|Incoming Call Action settings under SMS/Call Settings]]}}}
===Bluetooth settings configuration===
These are instructions on how to easily create a connection between a Bluetooth Hands Free device and Teltonika device. First the device Bluetooth settings need to be configured. These are the required steps:
*Press <span>Bluetooth</span> settings (position 1).
*Turn on BT Radio by pressing <span>Enable (visible)</span> (position 2). ''Local name'' (position 3) will be "DeviceName%imeiX" by default, which can be changed.
*Set ''Security Mode'' (position 4) to <span>PIN only</span> or <span>None</span>. <span>PIN + MAC list</span> or <span>MAC list only</span> security modes could also be selected, but in that case external device MAC address is required to be entered to ''Authorized Devices MAC List'' (position 7).
*Set connection mode to <span>Hands Free</span> (position 5).
*Set ''External Name'' (position 6) as your hands-free device name for proper identification. In the given example hands-free headset name is "DM" because at least 2 characters are required to recognize it and connect to it. For better and quicker adapter identification on the network you could enter a full device name. You could check your hands-free adapter Bluetooth name by scanning nearby Bluetooth devices using a mobile phone or a computer with Bluetooth adapter.
*Go to <span>SMS/Call Settings</span> in main menu and set ''Incoming Call Action'' to <span>Do Nothing</span> as shown on next figure.
*After all these steps press <span>Save to device</span> to save configuration.
*Now the device can be disconnected from the configurator.
===Connecting Bluetooth Hands Free adapter===
----Turn on hands-free device and then turn on its Bluetooth connection for pairing following your model instructions. Hands-free adapter should make a specific sound in the speakers or its LED identification should inform about a successful connection. To check if the adapter is successfully connected, dial the device phone number and the hands-free device should start ringing. If you later restart the device it will automatically reconnect to this adapter.
[[Category: General Technical Questions]]
