Changes

FMM80A Status info (view source)

Revision as of 21:18, 22 May 2023

3,213 bytes removed ,  21:18, 22 May 2023
no edit summary
Line 2: Line 2:     
Status info enables the user to monitor real time information of {{{model|FMM80A}}}. Following fields are displayed: '''Device Info''', '''GNSS Info''', '''GSM Info''', '''I/O Info''', '''Maintenance''' and etc. User is able to export all of the information to '''.HTML''' file using [[File:Export_html.png|15px|link=]] icon which is at the top right corner of the '''Device Info''' area.
 
Status info enables the user to monitor real time information of {{{model|FMM80A}}}. Following fields are displayed: '''Device Info''', '''GNSS Info''', '''GSM Info''', '''I/O Info''', '''Maintenance''' and etc. User is able to export all of the information to '''.HTML''' file using [[File:Export_html.png|15px|link=]] icon which is at the top right corner of the '''Device Info''' area.
−
{{{Main_Status_image|}}}
+
 
 +
[[Image:{{{model|FMM80A}}} Beacon-info-{{{family|FMB0}}} series.png|1000px|none]]
    
==Device Info==
 
==Device Info==
−
{{{Device_Info_image|}}}
+
* Device Name
−
*Device Name
+
* Firmware version
−
*Firmware version
+
* Last Start Time - last device start time.
−
*Last Start Time - last device start time.
+
* RTC Time - real time clock or current device time.
−
*RTC Time - real-time clock or current device time.
+
* Power Voltage (mV)
−
*Power Voltage (mV)
+
* Device IMEI
−
*Device IMEI
+
* External Storage (used/total) - {{{txt_memory|Internal Flash memory}}} free space.
−
*External Storage (used/total) - {{{txt_memory|Internal Flash memory}}} free space.
+
* Device Uptime - device uptime from last start time.
−
*Device Uptime - device uptime from last start time.
   
{{{battery|* Battery Voltage (mV)
 
{{{battery|* Battery Voltage (mV)
 
* Internal Battery Status - Charging/Not Charging}}}
 
* Internal Battery Status - Charging/Not Charging}}}
    
==GNSS Info==
 
==GNSS Info==
−
{{{GNSS_Info_image|}}}
+
* GNSS status
−
*GNSS status
+
** Module status - ON, [[{{{model|FMM80A}}}_Sleep_modes#GPS_Sleep_mode|GPS Sleep]], [[{{{model|FMM80A}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMM80A}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]], [[{{{model|FMM80A}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode.
−
**Module status - ON, [[{{{model|FMM80A}}}_Sleep_modes#GPS_Sleep_mode|GPS Sleep]], [[{{{model|FMM80A}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMM80A}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]], [[{{{model|FMM80A}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode.
+
** GNSS packets - the amount of GNSS packets device received from startup.
−
**GNSS packets - the number of GNSS packets the device received from startup.
+
** Fix Status - Fix/No Fix.  
−
**Fix Status - Fix/No Fix. <b>(Note: Fix time strongly depends on indoor/outdoor location. To achieve best performance acquiring GNSS fix device should be used in outdoor locations</b>)
+
** Fix Time - the last GNSS fix time.
−
**Fix Time - the last GNSS fix time.
+
* Satellites
−
*Satellites
+
** Visible -  the amount and type of satellites that are visible.
−
**Visible -  the number and type of satellites that are visible.
+
** In Use - the amount of satellites used for location positioning.
−
**In Use - the number of satellites used for location positioning.
+
* Location
−
*Location
+
** Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with map.
−
**Latitude/Longitude - shows current device coordinates and if you press them opens '''Object location''' window with a map.
+
** Altitude, Angle
−
**Altitude, Angle
+
** HDOP, PDOP
−
**HDOP, PDOP <br> {{{model|FMM80A}}} sends HDOP/PDOP value to the server in precision of dilution '''coefficient'''. HDOP/PDOP calculation depends on how many [[{{{model|FMM80A}}}_System_settings#GNSS_Source|GNSS sources]] are selected. If configured GNSS Source options are "GPS" and "GLONASS" and HDOP/PDOP values are received from both systems, the parameters HDOP/PDOP will be calculated as shown below: <br> "GPS" - 1.60; <br>"GLONASS" - 1.60; <br>"Galileo" - will be 0, because it is not selected and not taken into account; <br> "BeiDou" - will be 0, because it is not selected and not taken into account; <br> Calculation formula - '''("GPS" + "GLONASS" + "Galileo" + "BeiDou") / 4 (four GNSS systems)'''. <br> Calculated HDOP/PDOP value according to above parameters - '''(1.60 + 1.60 + 0 + 0) / 4 = 0.8''' coefficient.
+
** Speed - current device speed.
−
**Speed - current device speed.
  −
<BR>
  −
 
  −
=== HDOP/PDOP value calculation changes ===
  −
<BR>
  −
 
  −
Main calculations of separate HDOP/PDOP values of GPS, GLONASS, Galileo and BeiDou are made by GNSS modem. GNSS Modem already  outputs average of HDOP/PDOP from  4 GNSS systems (Used satellites) with a formula below.
  −
 
  −
<BR>
  −
Calculation formula - ("GPS" + "GLONASS" + "Galileo (0-sat)" + "BeiDou (0-sat)") / 2 (four GNSS systems)**<BR>
  −
Calculation formula - ("GPS" + "GLONASS") / 2 (two GNSS systems)<BR>
  −
 
  −
 
  −
HDOP/PDOP will be different if it will have 19 and i.e. other packet with  6 satellites. In parsed regular AVL packet example below all of 19 satellites are shown as in use.
  −
 
  −
<BR>
  −
Parsed NMEA Record Example:<BR>
  −
<BR>
  −
Record GPS longitude : -14116383<BR>
  −
Record GPS latitude  : 530738950<BR>
  −
Record GPS altitude  : 356<BR>
  −
Record GPS angle    : 357<BR>
  −
Record GPS satellites: 19<BR>
  −
Record GPS Kmh      : 102<BR>
  −
<BR>
      
==GSM Info==
 
==GSM Info==
−
{{{GSM_info_image|}}}
+
* GSM status  
−
*GSM status  
+
** Modem Status
−
**Modem Status
+
** SIM State - Ready/Unknown
−
**SIM State - Ready/Unknown
+
** GPRS Status - Activated/Deactivated
−
**GPRS Status - Activated/Deactivated
+
** Actual Operator Code
−
**Actual Operator Code
+
** Signal Level
−
**Signal Level
+
* GPRS traffic
−
*GPRS traffic
+
** Sent Data - the amount of data that has been sent by device.  
−
**Sent Data - the amount of data that has been sent by the device.
+
** Received Data - the amount of data that has been received by device.
−
**Received Data - the amount of data that has been received by the device.
+
** Total Traffic - Sent Data + Received Data
−
**Total Traffic - Sent Data + Received Data
+
* Sockets information:
−
*Sockets information:
+
** Type - AVL Data Sending
−
**Type - AVL Data Sending
+
** Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
−
**Socket - Closed or Server domain and port which is used when sending AVL Data via TCP/UDP.
+
* Records
−
*Records
+
** Sent Records count - how many records were sent to the server since last data reset.
−
**Sent Records count - how many records were sent to the server since the last data reset.
+
** Last Record Send - date and time when the last record was sent.
−
**Last Record Send - date and time when the last record was sent.
+
** Last Server Response Time - date and time when the last server response was.
−
**Last Server Response Time - date and time when the last server response was.
+
* SMS Count  
−
*SMS Count  
+
** Received SMS - the amount of SMS messages device has received.
−
**Received SMS - the amount of SMS messages the device has received.
+
** Sent SMS - the amount of SMS responses that were sent from the device.
−
**Sent SMS - the amount of SMS responses that were sent from the device.
+
** SMS Count - Received SMS + Sent SMS
−
**SMS Count - Received SMS + Sent SMS
      
==I/O Info==
 
==I/O Info==
−
*I/O Data - shows the current values from all configurable I/O elements.
+
* I/O Data - shows the current values from all configurable I/O elements.
−
{{{IO_info_image|}}}
      
==Maintenance==
 
==Maintenance==
−
{{{Maintenance_image|}}}
+
* Log/Dump
−
*Log/Dump
+
** Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMM80A}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
−
**Log - after button is pressed, the device starts log capturing for 10 minutes with configuration download. After this time device .log and configuration .cfg will be in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMM80A}}}_IMEI_Log.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code></p>
+
** Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMM80A}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
−
[[File:logging.gif]]
+
** Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
−
:*Dump - after button is pressed, the device starts to download .dmp logs and configuration .cfg from device in compressed archive. <p>Archive name: <code>YYYY_MM_DD_HH_MM_SS_{{{model|FMM80A}}}_IMEI_Dump.zip</code><br>Default directory: <code>C:\Users\<username>\Documents</code><br>Dump files can be read only with special software. If needed, provide these files to your Teltonika sales manager or Teltonika Support team.</p>
+
* Accelerometer - after button is pressed, the device starts to capture accelerometer values for 1 second.
−
:*Open directory - this button appears near '''Log''' or '''Dump''' if one of these functions were used.
  −
*Accelerometer - after the button is pressed, the device starts to capture accelerometer values for 1 second.
  −
{{{txt_lls|==LLS Calibration==
  −
* LLS calibration - in this section you can calculate calibration values of Analog LLS sensors for AVL server - create a polynomial which is needed to convert sensor values to liters:
  −
**Table is filled row by row. Each row represents one fuel tank fill. To calculate constants it is needed to select a sensor from ''„Available sensors“'', and fill the „Fuel, L.“ column and capture the current value of a sensor by clicking the ''"Refresh"'' button. Then the next value in liters should be entered by the user and so on.
  −
**When a table is filled, calculated a0, a1, a2, and a3 values should be seen.
  −
**To add a new tank fill row click "Add row". To remove the row click the ''"minus"'' button near the row you want to clear. To Clear all the rows click ''"Clear rows"''.
  −
**By clicking ''"Export"'' data will be exported to .csv file.
  −
**To recalculate the polynomial click on ''"Calculate"'' button.
  −
 
  −
[[File:LLS_Calibration.png]]
  −
 
   
   
 
   
−
Default log capture time, accelerometer capture time and files directories can be changed by pressing [[File:Configurator-settings.png|25px|link=]] icon at the bottom right corner.}}}
+
Default log capture time, accelerometer capture time and files directories can be changed by pressing [[File:Configurator-settings.png|25px|link=]] icon at the bottom right corner.
−
 
  −
{{{txt_can|==CAN Adapter Info==
  −
Shows the parameters with current values (including program number and software version) from CAN adapter when the device is connected to LV-CAN200/ALL-CAN300/CAN-CONTROL.
  −
 
  −
'''Note:''' not all parameters which are displayed in the ''"CAN Adapter Info"'' tab can be readable from the vehicle.}}}
      
[[Category:FMM80A Configuration]]
 
[[Category:FMM80A Configuration]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/85796"

Navigation menu