0
edits
Changes
mLine 1:
Line 1: − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
{{Template:FMB I/O settings|model=FMB125}}
{{Template:FMB I/O settings|model=FMB125}}
==FMB125 RS232/RS485 parameter configuration==
==FMB125 RS-232/RS-485 parameter configuration==
FMB-125 device supports RS232 and RS485 serial communication transmission of data standards and can be configured to work in different RS-232/RS-485 modes. More information about eatch mode in 8 chapter (RS-232 and RS-485).
===External UART working mode===
FMB125 supports RS-232 and RS-485 modes. Only one mode may be selected for work at one time:
* Disable - Disable RS-232/RS-485 functionality;
* RS232 - Select RS-232 functionality;
* RS485 - Select RS-485 functionality.
===RS232 working mode===
RS-232 support several modes:
* Log Mode – suitable for debugging/logging;
* NMEA – NMEA logs are sent via RS232 or RS485;
* LLS – LLS sensors support;
* LCD – external LCD support;
* RFID HID – RFID card reader support;
* RFID MF7 - RFID card reader support;
* Garmin FMI – Garmin support;
* TCP ASCII – for routing any input string from external device to server;
* TCP Binary – for routing any binary input data from external device to server.
===RS-232 Baudrate and parity===
Every RS232 mode support different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS232 working mode are provided in table 14. Also, default parity options are provided in table 14.
===RS-232 TCP Binary mode settings===
RS232 TCP Binary Mode has additional configurable parameters for advanced data filtering.
===RS232 Garmin Mode settings===
Garmin FMI mode has addditional filtering capabilities. It is possible to filter Ping and Unicode packets. If Ping filter will be enabled, then Ping packets will be blocked. If Unicode filter will be enabled, then Unicode packets will not be sent to server. Both filters may be enabled for simulatneous work.
===RS485 working mode===
RS485 support several modes:
* Log Mode – suitable for debugging/logging;
* NMEA – NMEA logs are sent via RS232 or RS485;
* LLS – LLS sensors support;
* TCP ASCII – for routing any input string from external device to server;
* TCP Binary – for routing any binary input data from external device to server.
===RS485 Baudrate===
Every RS485 mode support different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS485 working mode are provided in table 14.
===RS485 LLS Sensors===
LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device with configurator LLS sensor ID will be entered automatically.
