6,023
edits
Changes
Created page with "=Sensors= ==Configuring Blue Puck/Coin sensor== {| style="width: 100%;" |right|240px|border|class=tlt-border Bluetooth LE Blue Puck and Blue Coin..."
=Sensors=
==Configuring Blue Puck/Coin sensor==
{| style="width: 100%;"
|[[Image:ELA sensor app.PNG|right|240px|border|class=tlt-border]]
Bluetooth LE Blue Puck and Blue Coin sensors are disabled by default. Configurations to these sensors are written through NFC.<br>
To do this download <b>[https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile]</b> by Ela from <i>Google Play Store</i> to your Android-powered device.<br>
<b>Note!</b> Android-powered device that is used for configuring Blue Puck/Coin sensors must support NFC read/write functionality.<br><br>
Follow these instructions to easily configure Blue Puck/Coin Bluetooth LE sensor:
*Enable <code>Bluetooth</code> and <code>NFC</code> on your Android-powered device.
*Launch <b>Device Manager Mobile</b> on your Android-powered device.
*Select <i>Configuration.</i>
*Place your Android-powered device on top of Blue Puck/Coin sensor to scan it.
*Click <i>Enable</i> to allow Blue Puck/Coin sensor transmit advertising data. If it shows a tick, it is already connected to your phone.
*We recommend to set <i>Power</i> to 4 to get the best possible distance.
*Set ''BLE Emit Period'' to 1 seconds to get best possible sensor detection.
*Click <i>Write</i> button.
*Place your Android-powered device on top of Blue Puck/Coin sensor to write configuration to it.
Once the configuration is written successfully, the Blue Puck/Coin sensor will be enabled and use the settings configured in the APP.<br>
{| class="wikitable" style="border-style: solid; border-width: 0px;"
|+
| style="width: auto; text-align: left; background: #F6F6FB;" |'''NOTE!'''
| style="width: auto; text-align: left; background: #F6F6FB;" |Make sure that <i>Manufacturer data mode</i> is Disabled, otherwise BLE sensor will not be detected without additional changes in the device configuration.
|}
|}
==Update Periods==
[[Image:TAT100_BLE_Sensor_configuration_v3.png|{{{general|size}}}|right]]
'''BLE Feature:'''<br>
<code>None</code> – Bluetooth functionality will be disabled. <br>
<code>Sensors</code> – Enables Bluetooth functionality for sensors. <br>
'''Update frequency''' – how often BLE scanning will run. <br>
'''Scan duration''' – how long scanning will be processed. <br>
[[Image:TAT100_BLE_Sensor_configuration.png|1000px|center|border|class=tlt-border]]
::* [[Image:MAC_nRF_Connect.jpg|right|250px||border|class=tlt-border]] Type your <b>Blue Puck/Coin</b> MAC address in <code>MAC</code> field. You can check what is your <code>MAC</code> address by using [https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp nRF connect for Mobile] app from <i>Google Play</i>.
::* Configure the sensor fields according to the type of sensor used. More information about these settings can be found on [[#Blue Puck/Coin presets|Blue Puck/Coin presets]] section.
::* After all these steps press <code>Save to device</code> to save configuration.
<br><br><br><br><br><br>
<br>
<br>
<br>
<hr>
{|style="width: 100%;"
To check if the device has already received data from <b>Blue Puck/Coin</b> Bluetooth LE sensor, follow these steps:
:* Navigate to<code>Status</code> section.
:* Press <code>I/O Info</code> and look if <span style=color:#F6A83E>BLE Temp</span> has any values (depends on the type of sensor being used).
|}
<br>
<br>
{|style="width: 100%;"
[[Image:TAT140_BLE_IO.png|center|1000px|border|class=tlt-border]]
To check if the device has already received data from <b>Blue Puck/Coin</b> Bluetooth LE sensor, follow these steps:
:* Navigate to<code>I/O</code> section.
:* configure BLE Temp section #1 if you only have one sensor configured.
:* Set sensor priority High to immediately send a record.
:* Select Temperature range ('''Low''' – '''High''')
:* Select Operand:
:**<code>On Entrance</code> – when temperature enters specified range, the device sends a record to the server.
:**<code>On Exit</code> – when temperature exits specified range, the device sends record to the server.
:**<code>On Both</code> – Sends a record when device enters or exits specified range.
:**<code>Monitoring</code> – Performs the BLE scan when the device wakes up for periodic tracking action and sends the data to the server with the periodic record.
==Record received to the Server==
:* Device sent a record when it entered the range between 24 – 24.5 C
[[Image:TAT140_BLE_TEMP_Record.png|center|1000px|border|class=tlt-border]]
|}
==Blue Puck/Coin and EYE presets==
{|style="width: 100%;"
To read data from <b>Blue Puck/Coin and EYE</b> sensors, <span style=color:#F6A83E>Sensor</span> table must be configured with specified parameters to a particular sensor.
===Using premade sensor presets===
The configurator includes premade presets for sensors such as Blue PUCK/COIN MOV, MAG, T, RHT and etc.
[[File:BLE Presets v2.gif|center]]
===Blue Puck/Coin T===
Bluetooth LE Temperature sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>6E2A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Big Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
</table>
<br>
===Blue Puck/Coin RHT===
Bluetooth LE Temperature and Humidity sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>6E2A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>11</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>6F2A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>13</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===Blue Puck/Coin MAG===
Bluetooth LE Magnet sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>062A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Custom</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===Blue Puck/Coin MOV===
Bluetooth LE Movement sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>062A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Custom</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===EYE SENSOR (Sensors)===
EYE sensor (Sensors mode) configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>21</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Little Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>23</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>10</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>24</td>
<td>2</td>
<td>Save</td>
<td>Custom1</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>29</td>
<td>1</td>
<td>Save</td>
<td>Battery</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===EYE SENSOR (iBeacon & Sensors)===
EYE sensor (iBeacon & Sensors mode) configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>19</td>
<td>2</td>
<td>Save</td>
<td>Custom1</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>16</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Little Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>18</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>10</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>24</td>
<td>1</td>
<td>Save</td>
<td>Battery</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===EYE SENSOR (Eddystone & EYE Sensors)===
EYE sensor (Eddystone & EYE sensors mode) configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Custom1</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>4</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Little Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>6</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>10</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>12</td>
<td>1</td>
<td>Save</td>
<td>Battery</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
<!--[[Category: General Technical Questions]]-->
=Backup Tracker=
==Introduction to Backup Tracker functionality==
TAT240 supports a feature which allows to work as backup tracker. <br>
1. Even if Backup tracker is in alarm mode, device will continue to track its position as configured. <br>
2. If FMBXXX device ([[FMB_Compability_table_for_backup_tracker_feature|Compatibility table]]) is turned off, Alarm event from the TAT240 will be received and AVL 236 in the data packet will be sent.<br>
==Topology scheme==
[[File:422705 VEHICLE BACKUP SECURITY SOLUTION TOPOLOGY 02 (1).png|center|900px]]
==Backup feature logic==
[[File:TAT100_Backup_feature.png]]
{| class="wikitable" style="background: #0054A6; color: black; border: 2px #0054A6; border-bottom: 1px solid #0054A6;border-top: 1px solid #0054A6;border-left: 1px solid #0054A6;border-right: 1px solid #0054A6;""
|+
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: #0054A6; color: white;" |<b>NOTE:</b>
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: white;" | '''If TAT240 does not pick up advertised data packets from main tracker, TAT240 enters alarm state, generates and starts sending records with AVL ID 236 (Value 0).'''
|}
{| class="wikitable"
|- style="font-weight:bold;"
! Parameter Name
! Description
! ID
! Value
|-
| BLE Feature
| Select which BLE feature is enabled.<br />For Backup Tracker "Backup Tracker" <br />feature has to be selected
| 189
| 0 - None<br />1 - Backup Tracker <br />2 -Sensors
|-
| Central Device IMEI
| IMEI of central device that TAT240 is connected
| 190
| Valid IMEI number
|-
| Update Frequency
| Time in seconds for scanning intervals
| 1100
| Min 5 sec.<br />Max 66535 sec.<br />Default 120 sec.
|-
| Scan Duration
| Time in seconds for how long BLE scan will be running
| 1113
| Up to 60 seconds (Not configurable)
|}
==FIRMWARE (MODEM AND BLUENRG) INSTALLATION==
<p align="left">Download Firmware and Configurator from [[TAT100_Stable_firmware | '''STABLE FIRMWARE''']] or [[TAT100_Short-term_firmware |'''SHORT-TERM FIRMWARE''']] pages.</p>
<p align="left"><b> After device connection to Configurator:</b><br>
1) Select Update firmware;<br>
2) Select to flash Firmware(*.e.XIM) file;<br>
3) Click on file;<br>
4) And select Open.<br><br>
Wait until the device will upload the firmware.<br>
[[Image:TAT100Firmware.png|center|border|class=tlt-border]]<br>
<p align="left"><b>When parameters successfully loaded:</b><br>
1) Select Update firmware;<br>
2) Select to flash BlueNRG firmware(*.bin);<br>
3) Click on file;<br>
4) And select Open.<br><br>
[[Image:TAT100NRG.png|center|border|class=tlt-border]]
==Instructions==
'''To ENABLE backup feature on TAT240 device:'''
# <code>Bluetooth</code> → select <code>Backup Tracker</code><br>
# Enter main device (FMBxxx/TFT100/TST100/GH5200/TMT250) IMEI<br>
# Set <b>Update frequency</b> to <b>3600</b> (s) – <i>We do not recommend to set values below <b>1800</b> sec. in this field, as it will shorten the battery life.</i><br>
# Configure your <b>APN</b> and Server settings in <b>GPRS</b> section.<br>
[[File:TAT100_Bluetooth_Backup_v2.png|center|400px]]
'''To ENABLE backup feature on FMBXXX/TFT100/TST100/GH5200/TMT250 devices:'''
1. <code>Bluetooth</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
[[File:BT ONN.jpg|center|500px]]
2. <code>Bluetooth 4.0</code> → <code>Backup Tracker</code> set to <code>Enabled</code>
[[File:TAT100_bluetooth_backup_enable.png|center|700px]]
==DEVICE RECOGNITION CHECK USING TERMINAL==
* '''Debug mode:'''
Device is able to transmit its current state when connected to PC using USB cable. It is used to detect
errors and provide information to possible solutions when operating as unexpected.
# After launching terminal choose baud rate 115200 and hardware control – none.
# Select COM port which is assigned to “Virtual COM Port”.
# Click on ‘Start Log’ button and save a new file.
# Then click ‘Connect’ to start receiving messages from device.
[[File:Terminal_debug_TAT100.png|center|600px|border|class=tlt-border]]
Required Terminal application for log capturing can be downloaded here: [http://avl1.teltonika.lt/Downloads/Software/Terminal.zip Terminal] </br>
'''TAT240 terminal instructions:'''<br>
1. Connect TAT240 to the computer and open it with Terminal as shown in example above. <br>
2. When TAT240 recognizes the main tracker, a terminal will print a line as shown in example below:<br>
<code>[2021.10.26 06:28:40] – [ASSET.UART] << Device MAC: 785ae3d1f9de IMEI 141fa7497ac1 Command 0 Sequence 24 Packet Cnt 5 </code><br>
3. When TAT240 cannot see the main tracker Terminal will print a line as shown in example below:<br>
<code>[2021.10.26 10:50:03] – [ASSET.UART] << [2021.10.26 10:50:03] – [APP.TBT] ERROR! Amount of valid packets does not detect during this period! Triggering alarm </code><br>
[[Category:TAT240 Configuration]]
==Configuring Blue Puck/Coin sensor==
{| style="width: 100%;"
|[[Image:ELA sensor app.PNG|right|240px|border|class=tlt-border]]
Bluetooth LE Blue Puck and Blue Coin sensors are disabled by default. Configurations to these sensors are written through NFC.<br>
To do this download <b>[https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile]</b> by Ela from <i>Google Play Store</i> to your Android-powered device.<br>
<b>Note!</b> Android-powered device that is used for configuring Blue Puck/Coin sensors must support NFC read/write functionality.<br><br>
Follow these instructions to easily configure Blue Puck/Coin Bluetooth LE sensor:
*Enable <code>Bluetooth</code> and <code>NFC</code> on your Android-powered device.
*Launch <b>Device Manager Mobile</b> on your Android-powered device.
*Select <i>Configuration.</i>
*Place your Android-powered device on top of Blue Puck/Coin sensor to scan it.
*Click <i>Enable</i> to allow Blue Puck/Coin sensor transmit advertising data. If it shows a tick, it is already connected to your phone.
*We recommend to set <i>Power</i> to 4 to get the best possible distance.
*Set ''BLE Emit Period'' to 1 seconds to get best possible sensor detection.
*Click <i>Write</i> button.
*Place your Android-powered device on top of Blue Puck/Coin sensor to write configuration to it.
Once the configuration is written successfully, the Blue Puck/Coin sensor will be enabled and use the settings configured in the APP.<br>
{| class="wikitable" style="border-style: solid; border-width: 0px;"
|+
| style="width: auto; text-align: left; background: #F6F6FB;" |'''NOTE!'''
| style="width: auto; text-align: left; background: #F6F6FB;" |Make sure that <i>Manufacturer data mode</i> is Disabled, otherwise BLE sensor will not be detected without additional changes in the device configuration.
|}
|}
==Update Periods==
[[Image:TAT100_BLE_Sensor_configuration_v3.png|{{{general|size}}}|right]]
'''BLE Feature:'''<br>
<code>None</code> – Bluetooth functionality will be disabled. <br>
<code>Sensors</code> – Enables Bluetooth functionality for sensors. <br>
'''Update frequency''' – how often BLE scanning will run. <br>
'''Scan duration''' – how long scanning will be processed. <br>
[[Image:TAT100_BLE_Sensor_configuration.png|1000px|center|border|class=tlt-border]]
::* [[Image:MAC_nRF_Connect.jpg|right|250px||border|class=tlt-border]] Type your <b>Blue Puck/Coin</b> MAC address in <code>MAC</code> field. You can check what is your <code>MAC</code> address by using [https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp nRF connect for Mobile] app from <i>Google Play</i>.
::* Configure the sensor fields according to the type of sensor used. More information about these settings can be found on [[#Blue Puck/Coin presets|Blue Puck/Coin presets]] section.
::* After all these steps press <code>Save to device</code> to save configuration.
<br><br><br><br><br><br>
<br>
<br>
<br>
<hr>
{|style="width: 100%;"
To check if the device has already received data from <b>Blue Puck/Coin</b> Bluetooth LE sensor, follow these steps:
:* Navigate to<code>Status</code> section.
:* Press <code>I/O Info</code> and look if <span style=color:#F6A83E>BLE Temp</span> has any values (depends on the type of sensor being used).
|}
<br>
<br>
{|style="width: 100%;"
[[Image:TAT140_BLE_IO.png|center|1000px|border|class=tlt-border]]
To check if the device has already received data from <b>Blue Puck/Coin</b> Bluetooth LE sensor, follow these steps:
:* Navigate to<code>I/O</code> section.
:* configure BLE Temp section #1 if you only have one sensor configured.
:* Set sensor priority High to immediately send a record.
:* Select Temperature range ('''Low''' – '''High''')
:* Select Operand:
:**<code>On Entrance</code> – when temperature enters specified range, the device sends a record to the server.
:**<code>On Exit</code> – when temperature exits specified range, the device sends record to the server.
:**<code>On Both</code> – Sends a record when device enters or exits specified range.
:**<code>Monitoring</code> – Performs the BLE scan when the device wakes up for periodic tracking action and sends the data to the server with the periodic record.
==Record received to the Server==
:* Device sent a record when it entered the range between 24 – 24.5 C
[[Image:TAT140_BLE_TEMP_Record.png|center|1000px|border|class=tlt-border]]
|}
==Blue Puck/Coin and EYE presets==
{|style="width: 100%;"
To read data from <b>Blue Puck/Coin and EYE</b> sensors, <span style=color:#F6A83E>Sensor</span> table must be configured with specified parameters to a particular sensor.
===Using premade sensor presets===
The configurator includes premade presets for sensors such as Blue PUCK/COIN MOV, MAG, T, RHT and etc.
[[File:BLE Presets v2.gif|center]]
===Blue Puck/Coin T===
Bluetooth LE Temperature sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>6E2A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Big Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
</table>
<br>
===Blue Puck/Coin RHT===
Bluetooth LE Temperature and Humidity sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>6E2A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>11</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>6F2A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>13</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===Blue Puck/Coin MAG===
Bluetooth LE Magnet sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>062A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Custom</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===Blue Puck/Coin MOV===
Bluetooth LE Movement sensor configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>5</td>
<td>2</td>
<td>Match</td>
<td>None</td>
<td>062A</td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Custom</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===EYE SENSOR (Sensors)===
EYE sensor (Sensors mode) configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>21</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Little Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>23</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>10</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>24</td>
<td>2</td>
<td>Save</td>
<td>Custom1</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FE</td>
<td>29</td>
<td>1</td>
<td>Save</td>
<td>Battery</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===EYE SENSOR (iBeacon & Sensors)===
EYE sensor (iBeacon & Sensors mode) configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>19</td>
<td>2</td>
<td>Save</td>
<td>Custom1</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>16</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Little Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>18</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>10</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>09</td>
<td>24</td>
<td>1</td>
<td>Save</td>
<td>Battery</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
===EYE SENSOR (Eddystone & EYE Sensors)===
EYE sensor (Eddystone & EYE sensors mode) configuration
<table style="border-collapse: collapse; width:100%;" border="1;">
<tr style="text-align: center; background: #90c6ff;>
<th width="10%">Type</th>
<th width="10%">Data Offset</th>
<th width="10%">Data Size</th>
<th width="10%">Action</th>
<th width="10%">IO</th>
<th width="10%">Match</th>
<th width="10%">Endianess</th>
<th width="10%">Multiplier</th>
<th width="10%">Offset</th>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>7</td>
<td>2</td>
<td>Save</td>
<td>Custom1</td>
<td></td>
<td>Big Endian</td>
<td>1</td>
<td>0</td>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>4</td>
<td>2</td>
<td>Save</td>
<td>Temperature</td>
<td></td>
<td>Little Endian</td>
<td>0.1</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>6</td>
<td>1</td>
<td>Save</td>
<td>Humidity</td>
<td></td>
<td>Little Endian</td>
<td>10</td>
<td>0</td>
</tr>
</tr>
<tr style="text-align: center;">
<td>FF</td>
<td>12</td>
<td>1</td>
<td>Save</td>
<td>Battery</td>
<td></td>
<td>Little Endian</td>
<td>1</td>
<td>0</td>
</tr>
</table>
<br>
<!--[[Category: General Technical Questions]]-->
=Backup Tracker=
==Introduction to Backup Tracker functionality==
TAT240 supports a feature which allows to work as backup tracker. <br>
1. Even if Backup tracker is in alarm mode, device will continue to track its position as configured. <br>
2. If FMBXXX device ([[FMB_Compability_table_for_backup_tracker_feature|Compatibility table]]) is turned off, Alarm event from the TAT240 will be received and AVL 236 in the data packet will be sent.<br>
==Topology scheme==
[[File:422705 VEHICLE BACKUP SECURITY SOLUTION TOPOLOGY 02 (1).png|center|900px]]
==Backup feature logic==
[[File:TAT100_Backup_feature.png]]
{| class="wikitable" style="background: #0054A6; color: black; border: 2px #0054A6; border-bottom: 1px solid #0054A6;border-top: 1px solid #0054A6;border-left: 1px solid #0054A6;border-right: 1px solid #0054A6;""
|+
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: #0054A6; color: white;" |<b>NOTE:</b>
| style="width: auto; text-align: left; border: 1px solid #0054A6; border-bottom: 1px solid #0054A6; background: white;" | '''If TAT240 does not pick up advertised data packets from main tracker, TAT240 enters alarm state, generates and starts sending records with AVL ID 236 (Value 0).'''
|}
{| class="wikitable"
|- style="font-weight:bold;"
! Parameter Name
! Description
! ID
! Value
|-
| BLE Feature
| Select which BLE feature is enabled.<br />For Backup Tracker "Backup Tracker" <br />feature has to be selected
| 189
| 0 - None<br />1 - Backup Tracker <br />2 -Sensors
|-
| Central Device IMEI
| IMEI of central device that TAT240 is connected
| 190
| Valid IMEI number
|-
| Update Frequency
| Time in seconds for scanning intervals
| 1100
| Min 5 sec.<br />Max 66535 sec.<br />Default 120 sec.
|-
| Scan Duration
| Time in seconds for how long BLE scan will be running
| 1113
| Up to 60 seconds (Not configurable)
|}
==FIRMWARE (MODEM AND BLUENRG) INSTALLATION==
<p align="left">Download Firmware and Configurator from [[TAT100_Stable_firmware | '''STABLE FIRMWARE''']] or [[TAT100_Short-term_firmware |'''SHORT-TERM FIRMWARE''']] pages.</p>
<p align="left"><b> After device connection to Configurator:</b><br>
1) Select Update firmware;<br>
2) Select to flash Firmware(*.e.XIM) file;<br>
3) Click on file;<br>
4) And select Open.<br><br>
Wait until the device will upload the firmware.<br>
[[Image:TAT100Firmware.png|center|border|class=tlt-border]]<br>
<p align="left"><b>When parameters successfully loaded:</b><br>
1) Select Update firmware;<br>
2) Select to flash BlueNRG firmware(*.bin);<br>
3) Click on file;<br>
4) And select Open.<br><br>
[[Image:TAT100NRG.png|center|border|class=tlt-border]]
==Instructions==
'''To ENABLE backup feature on TAT240 device:'''
# <code>Bluetooth</code> → select <code>Backup Tracker</code><br>
# Enter main device (FMBxxx/TFT100/TST100/GH5200/TMT250) IMEI<br>
# Set <b>Update frequency</b> to <b>3600</b> (s) – <i>We do not recommend to set values below <b>1800</b> sec. in this field, as it will shorten the battery life.</i><br>
# Configure your <b>APN</b> and Server settings in <b>GPRS</b> section.<br>
[[File:TAT100_Bluetooth_Backup_v2.png|center|400px]]
'''To ENABLE backup feature on FMBXXX/TFT100/TST100/GH5200/TMT250 devices:'''
1. <code>Bluetooth</code> → <code>BT Radio</code> set to <code>Enable(visible)</code>
[[File:BT ONN.jpg|center|500px]]
2. <code>Bluetooth 4.0</code> → <code>Backup Tracker</code> set to <code>Enabled</code>
[[File:TAT100_bluetooth_backup_enable.png|center|700px]]
==DEVICE RECOGNITION CHECK USING TERMINAL==
* '''Debug mode:'''
Device is able to transmit its current state when connected to PC using USB cable. It is used to detect
errors and provide information to possible solutions when operating as unexpected.
# After launching terminal choose baud rate 115200 and hardware control – none.
# Select COM port which is assigned to “Virtual COM Port”.
# Click on ‘Start Log’ button and save a new file.
# Then click ‘Connect’ to start receiving messages from device.
[[File:Terminal_debug_TAT100.png|center|600px|border|class=tlt-border]]
Required Terminal application for log capturing can be downloaded here: [http://avl1.teltonika.lt/Downloads/Software/Terminal.zip Terminal] </br>
'''TAT240 terminal instructions:'''<br>
1. Connect TAT240 to the computer and open it with Terminal as shown in example above. <br>
2. When TAT240 recognizes the main tracker, a terminal will print a line as shown in example below:<br>
<code>[2021.10.26 06:28:40] – [ASSET.UART] << Device MAC: 785ae3d1f9de IMEI 141fa7497ac1 Command 0 Sequence 24 Packet Cnt 5 </code><br>
3. When TAT240 cannot see the main tracker Terminal will print a line as shown in example below:<br>
<code>[2021.10.26 10:50:03] – [ASSET.UART] << [2021.10.26 10:50:03] – [APP.TBT] ERROR! Amount of valid packets does not detect during this period! Triggering alarm </code><br>
[[Category:TAT240 Configuration]]
