Changes

==RS-232 Interface==

==RS-232 Interface==

RS-232 supports full-duplex communication which means the data can be both sent and received at the same time as they use separate transmission lines. Most of the modes are the same as for [[FMB125_RS-232_and_RS-485#RS-485_modes|RS-485]].

RS-232 supports full-duplex communication which means the data can be both sent and received at the same time as they use separate transmission lines. Most of the modes are the same as for [[FMB125_RS-232_and_RS-485#RS-485_modes|RS-485]].

FMB125 RS-232 connection diagram are shown on the figure above.

FMB125 RS-232 connection diagram is shown on the figure above.

===RS-232 modes===

===RS-232 modes===

Log mode, NMEA, LLS, TCP ASCII and TCP Binary modes are identical to those of RS-485. In RS-232 LLS mode only one LLS fuel level sensor can be connected.

Log mode, NMEA, LLS, TCP ASCII and TCP Binary modes are identical to those of [[FMB125_RS-232_and_RS-485#RS-485_modes|RS-485]]. In RS-232 LLS mode only one LLS fuel level sensor can be connected.

* RS-232 LCD mode:

* RS-232 LCD mode:

In this mode user is able to communicate with server through terminal. A link between FMB device and the server has to be established for this mode to function properly.

In this mode user is able to communicate with the server through terminal. A link between FMB device and the server has to be established for this mode to function properly.

* RS-232 RFID HID/RFID MF7 mode:

* RS-232 RFID HID/RFID MF7 mode:

The difference between ''RFID HID Mode'' and ''RFID MF7 Mode'' is that in ''RFID HID Mode'' FMB125 understands RFID messages that are in hexadecimal format and ''RFID MF7 Mode'' interpretes messages that are in decimal format. What type of RFID is sent to FMB125 depends on the reader. For example, ''RFID HID mode'' message looks like "$aa$02$03$04$17$89$00$01" while ''MF7 mode'' message is of following format: "1213141519".<br/>The selected mode has to correspond to the RFID reader's mode.<br/>For more information about RFID IDs and devices please contact your local sales representative.

The difference between ''RFID HID Mode'' and ''RFID MF7 Mode'' is that in ''RFID HID Mode'' FMB125 understands RFID messages that are in hexadecimal format and ''RFID MF7 Mode'' interpretes messages that are in decimal format. The type of RFID message sent to FMB125 depends on the RFID reader. For example, ''RFID HID mode'' message looks like "$aa$02$03$04$17$89$00$01" while ''MF7 mode'' message is of following format: "1213141519".<br/>The selected mode has to correspond to the RFID reader's mode.<br/>For more information about RFID IDs and devices please contact your local sales representative.

* RS-232 GARMIN mode:

* RS-232 GARMIN mode:

Garmin provides a Fleet Management Interface Tool Kit, once FMB125 is connected to the navigator it enables the driver to have a "screen" in their vehicle for real-time navigation, messaging and offers job dispatch capabilities to help them be more efficient.<br/>FMB125 and Garmin operational diagram is shown on the figure below.

Garmin provides a Fleet Management Interface Tool Kit, once FMB125 is connected to the navigator it enables the driver to have a "screen" in their vehicle for real-time navigation and messaging, and offers job dispatch capabilities to help them be more efficient.<br/>FMB125 and Garmin operational diagram is shown on the figure below.

[[Image:Fmb125_garmin_block.png|800px|center]]

[[Image:Fmb125_garmin_block.png|800px|center]]