Changes

FMB930 Features settings (view source)

Revision as of 10:59, 17 August 2023

10 bytes removed ,  10:59, 17 August 2023
no edit summary
Line 112: Line 112:  
[[File:Immobilizer1.png|{{{general|size}}}|right]]
 
[[File:Immobilizer1.png|{{{general|size}}}|right]]
   −
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any iButton ID (or RFID card) is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After iButton identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the ''iButton List Check'' parameter is enabled, the authorization will be successful only if the attached iButton is specified in the iButton list.<br/>
+
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' Beacon authentication was introduced. Beacon authentication works in the same way as iButton authentication. To use authorized Beacons, the Beacon list should be filled in the device configurator. Instructions how to list Beacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.
−
<br/><br/>
  −
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to attach the iButton to the reader again.
      +
By using Beacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.
   −
From the firmware version '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_firmware_errata 03.25.14]''' iBeacon authentication was introduced. iBeacon authentication works in the same way as iButton authentication. To use authorized iBeacons, the iBeacon list should be filled in the device configurator. Instructions how to list iBeacons in FMB devices can be found '''[https://wiki.teltonika-gps.com/view/{{{model|FMB1YX}}}_Beacon_List here]'''.
+
If ''DOUT Control'' is disabled, the scenario will only generate events without digital output activation. If ''DOUT Control'' is enabled {{{text_dout|DOUT1/DOUT2}}} turns ON if ignition turns ON (''Ignition Source'' is configured to 1). After any Beacon ID is attached, {{{text_dout|DOUT1/DOUT2}}} turns OFF. After Beacon identification configured ''Ignition Source'' can be turned OFF (''Ignition Source'' is configured to 0) for no longer than 30 seconds, otherwise, the immobilizer must be repeated. If the '' List Check for Authorization'' parameter is enabled, the authorization will be successful only if the attached Beacon is specified in the Beacon list.<br/>
 +
<br/><br/>
 +
The ignition off timeout parameter is used to set the duration after which authorization is activated when the ignition is turned off. For example, if the Ignition off timeout is set to 30 seconds when the driver turns the ignition off, he has 30 seconds until the immobilizer security check turns on again. In other words, if the driver turns off the ignition and turns it back on in less than 30 seconds, then he will not have to make an idenfication with the Beacon again.
   −
By using iBeacon authorization, the immobilizer feature can be used with devices that don't have a 1-wire data connection available.
   
<br/><br/><youtube>gjuiJjAejWU</youtube>
 
<br/><br/><youtube>gjuiJjAejWU</youtube>
  
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/88214"

Navigation menu