Changes

==Configuration of Manual CAN commands==

==Configuration of Manual CAN commands==

[[Image:CAN1_bus_settings.png|right]]

[[Image:CAN1_bus_settings.png|right]]

==== <u>Example:</u> ====

==== <u>Example</u> ====

In the Tachograph/CAN section the user has to select suitable baudrate. Manual CAN baudrate should be visible in the CAN protocol. If it is not known, the user can try to choose different baudrates to indicate which one works.

In the Tachograph/CAN section the user has to select suitable baudrate. Manual CAN baudrate should be visible in the CAN protocol. If it is not known, the user can try to choose different baudrates to indicate which one works.

Protocol example: [[Image:Manual_can_extention.png|right]]

''Protocol example'': [[Image:Manual_can_extention.png|center]]

1. Select CAN Type. Normally every CAN protocol documentation should mentioned which CAN type to use. If not, select Extended.

1. Select CAN Type. Normally every CAN protocol documentation should mentioned which CAN type to use. If not, select Extended.