Changes

==Configuration of Manual CAN commands==

==Configuration of Manual CAN commands==

[[Image:CAN1_bus_settings.png|right]]

[[Image:CAN1_bus_settings.png|right]] <br />

==== <u>Example</u> ====

==== <u>Example</u> ====

In the Tachograph/CAN section the user has to select suitable baudrate. Manual CAN baudrate should be visible in the CAN protocol. If it is not known, the user can try to choose different baudrates to indicate which one works.

In the Tachograph/CAN section the user has to select suitable baudrate. Manual CAN baudrate should be visible in the CAN protocol. If it is not known, the user can try to choose different baudrates to indicate which one works. <br />

| Battery fast charging enable/disable

| Battery fast charging enable/disable

|  

|  

| 0:3<br />4:7

| 0:3<br />4:7<br />

| 7:0 <br />7:0

| 7:0<br />7:0<br />

| Battery charge enable<br />Battery charge disable

| Battery charge enable<br />Battery charge disable<br />

| ON/OFF

| ON/OFF

| 19

| 19

| rowspan="5" |  

| rowspan="5" |  

| rowspan="5" | 0:1

| rowspan="5" | 0:1

| rowspan="5" | 5:0<br />

| rowspan="5" | 5:0

| 00001 - request SOC 1st

| 00001 - request SOC 1st

|  

|  

| 10000 - request voltage

| 10000 - request voltage

|  

|  

|-

|-

| rowspan="2" | 0x453

| rowspan="2" | 0x453

| rowspan="2" | Battery fast charging mode switch

| rowspan="2" | Battery Fast charging mode switch

| rowspan="2" |  

| rowspan="2" |  

| rowspan="2" | 0:1

| rowspan="2" | 0:1