315
edits
Changes
mLine 6:
Line 6: − * '''03.00.13.Rev.05''' or newer firmware (for '''FMC650/FMM650''') Line 21:
Line 20: − + + + + + + +
no edit summary
* '''FMC650/FMM650/FMB641''' device
* '''FMC650/FMM650/FMB641''' device
* '''03.01.00.Rev.00''' or newer firmware (for '''FMB641/FMC650/FMM650''')
* '''03.01.00.Rev.00''' or newer firmware (for '''FMB641/FMC650/FMM650''')
* Transport or equipment with CAN interface which works via ''J1939 protocol''
* Transport or equipment with CAN interface which works via ''J1939 protocol''
Baudrates are configurable in ''CAN \ Tachograph'' tab settings for connected CAN line which could be CAN1 or CAN2.
Baudrates are configurable in ''CAN \ Tachograph'' tab settings for connected CAN line which could be CAN1 or CAN2.
For Manual CAN request functionality CAN is selected in Manual CAN IO tab
For '''Manual CAN request''' functionality, CAN is selected in ''Manual CAN IO tab''. In ''Manual CAN IO,'' the input which should receive value must be '''enabled'''.
* '''Request ID/PGN''' - depends on CAN Type parameter and defines which CAN ID will be requested by device.
* '''Payload''' - defines data bytes, which are send if '''RTR''' (Remote Transmission Request) is disabled.
* '''Request Period''' - defines how often the request will be send. If 0 is selected - ID will not be requested.
* '''Request Data Length''' - defines data length of requested ID.
* '''RTR -''' Remote Transmission Request, is the choice if data frame needs to be send '''(if disabled)''' and if data frame needs to be requested '''(if enabled)'''.
