2,538
edits
Changes
no edit summary
If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br></br>
If the Static navigation filter is disabled, it will apply no changes to GPS data. If the Static navigation filter is enabled, it will filter changes in GPS position if no movement (configured movement source) or ignition (configured ignition source) is detected (depends on what static navigation settings are selected: movement, ignition or both sources). It allows filtering GPS jumps when an object is parked (is not moving) and GPS position is still traced.<br></br>
==Sleep Mode==
==Sleep Mode==
[[Image:Sleep_mode.gif|right|300px]]
[[File:NO 1 WIRE FINAL.png|right]]<br>
<br>
This feature will be used to save power consumption of external battery (power supply). It let the user choose one of four power saving modes which he would prefer: '''[[{{{model|FMC880}}} Sleep modes#GPS Sleep mode|GPS Sleep]]''', '''[[{{{model|FMC880}}} Sleep modes#Deep Sleep mode|Deep Sleep]]''', '''[[{{{model|FMC880}}} Sleep modes#Online Deep Sleep mode|Online Deep Sleep]]''' and '''[[{{{model|FMC880}}} Sleep modes#Ultra Deep Sleep|Ultra Deep Sleep]]'''. Also, after the mentioned options you can find the Timeout (min) parameter which starts counting when the device is in STOP mode. After timeout is reached and all conditions for sleep mode are met, the device goes to sleep mode. <br></br>
This feature will be used to save power consumption of external battery (power supply). It let the user choose one of four power saving modes which he would prefer: '''[[{{{model|FMC880}}} Sleep modes#GPS Sleep mode|GPS Sleep]]''', '''[[{{{model|FMC880}}} Sleep modes#Deep Sleep mode|Deep Sleep]]''', '''[[{{{model|FMC880}}} Sleep modes#Online Deep Sleep mode|Online Deep Sleep]]''' and '''[[{{{model|FMC880}}} Sleep modes#Ultra Deep Sleep|Ultra Deep Sleep]]'''. Also, after the mentioned options you can find the Timeout (min) parameter which starts counting when the device is in STOP mode. After timeout is reached and all conditions for sleep mode are met, the device goes to sleep mode. <br></br>
'''Note:''' Detail description and conditions about every mode you can find [[{{{model|FMC880}}} Sleep modes|'''here''']].<br></br>
'''Note:''' Detail description and conditions about every mode you can find [[{{{model|FMC880}}} Sleep modes|'''here''']].<br></br>
===BT/BLE module OFF during Sleep modes===
------------------
Power off sleep mode can be described as the lowest possible power consumption mode where the device can go into power off state.
<br>
From the version, 03.28.XX this new functionality includes new parameters:
*'''Periodic Wakeup''' – if value is greater than zero, device while being in Deep Sleep or Online Deep Sleep, will wake up after defined period for beacon collection. This is mainly should be used when Bluetooth is disabled in sleep.
*'''Bluetooth On While In Sleep'''- by default this parameter value is set to Enable and BT will work as in base functionality. If this value is set to Disable, Bluetooth will be turned off when device goes to Deep Sleep or Online Deep Sleep and will be turned on during Periodic Wakeup or if device enters normal state.
[[Image:PWU.jpg|right|300px]]
</br></br>
Note: In case when during scan after wakeup no BLE devices will be found FMB will be active for configured scan duration time in Bluetooth 4.0 tab. After that timeout FMB will go to sleep state.
<br>
Power off sleep mode can be described as the lowest possible power consumption mode where the device can go into power off state and can only wake up if one of the conditions is true:
*Movement is detected by accelerometer (not by the configured movement source);
*External power is applied;
*It is the time to make a new periodic record (new feature);
<br>
Please keep a note that Power OFF Sleep will not work if any USB cable is connected to the device.
==Ignition Source==
==Ignition Source==
Ignition source will be used to determine ignition of vehicle. {{{voltage|If voltage is between High Voltage Level and Low Voltage Level (below ''Ignition Settings'' options) - ignition is ON. If voltage is higher than High Voltage Level or lower than Low Voltage Level - ignition is OFF.}}}<br>
Ignition source will be used to determine ignition of vehicle. {{{voltage|If voltage is between High Voltage Level and Low Voltage Level (below ''Ignition Settings'' options) - ignition is ON. If voltage is higher than High Voltage Level or lower than Low Voltage Level - ignition is OFF.}}}<br>
