299
edits
Changes
configuration for fmc650
*'''Do not forget''' to configure ''DualCam'' server information. In '''RS232\RS485''' fill in '''DualCam Server Settings''' with ''Domain'' and ''Port'' entries.
*'''Do not forget''' to configure ''DualCam'' server information. In '''RS232\RS485''' fill in '''DualCam Server Settings''' with ''Domain'' and ''Port'' entries.
[[File:Dualcamserver.png|600px]]
[[File:Dualcamserver.png|600px]]
'''DUALCAM FMC650 Configuration'''
'''(!) Required FW version''' - 03.00.14.Rev.111
1. Make sure Data Protocol is set to Codec 8 Extended
2. In RS232 \ RS485 settings tab, make sure to choose DualCam to COM1/COM2 settings, and set the required baudrate.
3. Make sure to change I/O camera state Priorities to Low in I/O Settings
4. As soon as DualCam is selected, COM1 Camera and Camera I/O settings tabs will appear in the configurator menu.
5. In appeared COM1 Camera tab, make sure to configure everything by your needs, and do not forget to complete the "Domain" and "Port" settings in "DualCam" Scenario Settings
'''''NOTE: This is a base setup for the device to work properly. Other device configuration is made according to your needs.'''''
'''''NOTE: There are different settings for picture quality and compression, these settings will affect picture/video sizes and upload speeds. For more information about transfer sizes and timings, please visit our DualCam Data Trasnfer Timing section'''''
*'''''NOTE:''''' ''This is a base setup for the device to work properly. Other device configuration is made according to your needs.
*'''''NOTE:''''' ''This is a base setup for the device to work properly. Other device configuration is made according to your needs.
*'''''NOTE:''''' ''There are different settings for picture quality and compression, these settings will affect picture/video sizes and upload speeds. For more information about transfer sizes and timings, please visit our [[Camera_Manual#DualCam_data_transfer_timing | DualCam Data Trasnfer Timing]] section
*'''''NOTE:''''' ''There are different settings for picture quality and compression, these settings will affect picture/video sizes and upload speeds. For more information about transfer sizes and timings, please visit our [[Camera_Manual#DualCam_data_transfer_timing | DualCam Data Trasnfer Timing]] section
==Camera Scenario Mode==
==Camera Scenario Mode==
