Changes

305 bytes removed ,  13:07, 24 October 2023
no edit summary
Line 21: Line 21:  
'''(!) Required FW version''' - 03.00.14.Rev.111
 
'''(!) Required FW version''' - 03.00.14.Rev.111
   −
1. Make sure Data Protocol is set to Codec 8 Extended
+
*Make sure Data Protocol is set to Codec 8 Extended
    
[[Image:Data_protocol.gif|300px]]
 
[[Image:Data_protocol.gif|300px]]
   −
2. In RS232 \ RS485 settings tab, make sure to choose DualCam to COM1/COM2 settings, and set the required baudrate.  
+
*In RS232 \ RS485 settings tab, make sure to choose DualCam to COM1/COM2 settings, and set the required baudrate.  
   −
3. Make sure to change I/O camera state Priorities to Low in I/O Settings
+
[[Image:Dualcam rs232.png|600px]]
   −
4. As soon as DualCam is selected, COM1 Camera and Camera I/O settings tabs will appear in the configurator menu.  
+
*Make sure to change '''I/O''' Camera state '''Priorities''' to ''Low''
 +
'''
 +
[[File:Io.gif|500px]]
 +
'''
   −
5. In appeared COM1 Camera tab, make sure to configure everything by your needs, and do not forget to complete the "Domain" and "Port" settings in "DualCam" Scenario Settings
+
*As soon as DualCam is selected, COM1 Camera and Camera I/O settings tabs will appear in the configurator menu.
    +
[[Image:Com1 cameraio.png|600px]]
   −
   '''''NOTE: This is a base setup for the device to work properly. Other device configuration is made according to your needs.'''''
+
*In appeared COM1 Camera tab, make sure to configure everything by your needs, and do not forget to complete the "Domain" and "Port" settings in "DualCam" Scenario Settings
   −
'''''NOTE: There are different settings for picture quality and compression, these settings will affect picture/video sizes and upload speeds. For more information about transfer sizes and timings, please visit our DualCam Data Trasnfer Timing section'''''
   
*'''''NOTE:''''' ''This is a base setup for the device to work properly. Other device configuration is made according to your needs.   
 
*'''''NOTE:''''' ''This is a base setup for the device to work properly. Other device configuration is made according to your needs.   
   −
*'''''NOTE:''''' ''There are different settings for picture quality and compression, these settings will affect picture/video sizes and upload speeds. For more information about transfer sizes and timings, please visit our [[Camera_Manual#DualCam_data_transfer_timing | DualCam Data Trasnfer Timing]] section
+
*'''''NOTE:''''' ''There are different settings for picture quality and compression, these settings will affect picture/video sizes and upload speeds. For more information about transfer sizes and timings, please visit our [[Camera_Manual#DualCam_data_transfer_timing | DualCam Data Transfer Timing]] section
     

Navigation menu