6,023
edits
Changes
Configuring EYE sensors (view source)
Revision as of 14:58, 27 October 2023
, 14:58, 27 October 2023Text replacement - "Bluetooth®" to "Bluetooth"
# In '''System settings tab''' Enable Codec8 Extended;
# In '''System settings tab''' Enable Codec8 Extended;
# In '''GPRS settings tab''' Configure GPRS Settings and Server Settings
# In '''GPRS settings tab''' Configure GPRS Settings and Server Settings
# In '''Bluetooth® settings tab''' Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;
# In '''Bluetooth settings tab''' Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
# In '''Bluetooth® 4.0 tab''' settings:
# In '''Bluetooth 4.0 tab''' settings:
## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
## In '''Bluetooth® 4.0 tab''' settings Advanced Mode Settings Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
## In '''Bluetooth 4.0 tab''' settings Advanced Mode Settings Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
## Configure MAC address of the sensor
## Configure MAC address of the sensor
# To receive data to server enable corresponding IO elements in '''I/O settings tab'''
# To receive data to server enable corresponding IO elements in '''I/O settings tab'''
