Changes

[[Image:Fmb120_daq_mode_config.png|800px|centre]]<br/>

[[Image:Fmb120_daq_mode_config.png|800px|centre]]<br/>

''Min Saved Records'' defines minimum number of coordinates and I/O data that should be transferred with one connection to the server. If {{{model|FMB1YX}}} does not have enough coordinates to send to the server, it will check again after a time interval defined in ''Send Period''.<br/>''Send period'' controls the frequency of GPRS data being sent to server. Module makes attempts to send collected data to server every defined period. If it does not have enough records (depends on the parameter ''Min. Saved Records'' described above), it tries again after the defined time interval.

''Min Saved Records'' defines minimum number of coordinates and I/O data that should be transferred within a single connection to the server. If {{{model|FMB1YX}}} does not have enough coordinates to send to the server, it will check again after a time interval defined in ''Send Period'' field.<br/>''Send period'' controls the frequency of GPRS data being sent to server. Module makes attempts to send collected data to the server every defined period of time. If it does not have enough records (depends on the parameter ''Min. Saved Records'' described above), it tries again after the defined time interval.

{| class="wikitable" style="border-style: solid; border-width: 0px"

{| class="wikitable" style="border-style: solid; border-width: 0px"

{{{model|FMB1YX}}} is able to collect records using four methods at the same time: time, distance, angle and speed based data acquisition:

{{{model|FMB1YX}}} is able to collect records using four methods at the same time: time, distance, angle and speed based data acquisition:

* Time based data acquiring (''Min Period'') – records are acquired every time when a defined interval of time passes. Entering zero disables data acquisition based on time.

* Time based data acquisition (''Min Period'') – records are acquired every time when a defined interval of time passes. Entering zero disables data acquisition based on time.

* Distance based data acquiring (''Min Distance'') – records are acquired when the distance between previous coordinate and current position is greater than a defined parameter value. Entering zero disables data acquisition based on distance.

* Distance based data acquisition (''Min Distance'') – records are acquired when the distance between previous coordinate and current position is greater than a defined parameter value. Entering zero disables data acquisition based on distance.

* Angle based data acquiring (''Min Angle'') – records are acquired when angle difference between last recorded coordinate and current position is greater than a defined value. Entering zero disables data acquisition based on angle.

* Angle based data acquisition (''Min Angle'') – records are acquired when the angle difference between last recorded coordinate and current position is greater than a defined value. Entering zero disables data acquisition based on angle.

* Speed based data acquiring (''Min Speed Delta'') – records are acquired when speed difference between last recorded coordinate and current position is greater than a defined value. Entering zero disables data acquisition based on speed.

* Speed based data acquisition (''Min Speed Delta'') – records are acquired when the speed difference between last recorded coordinate and current position is greater than a defined value. Entering zero disables data acquisition based on speed.

[[Image:Fmb120_daq_mode_basis.png|800px|centre]]

[[Image:Fmb120_daq_mode_basis.png|800px|centre]]