2,538
edits
Changes
How to capture ELA Beacon internal battery voltage? (view source)
Revision as of 07:23, 14 November 2023
, 07:23, 14 November 2023no edit summary
==Disclaimer==
[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth, '''please consider turning it off''' or '''change Bluetooth PIN''' to remove potential risks.
If you are using Bluetooth we strongly recommend '''using AES encryption''' for enhanced security.
== General Information ==
== General Information ==
First thing you have to know before configuring a sensor is data protocol. For detailed ELA description about Bluetooth frame specifications please refer [https://elainnovation.com/wp-content/uploads/2020/10/BLE-Frame-specifications-11B-EN.pdf here.] To enable internal battery voltage in the scan response frame, battery voltage presence must be configured in the NFC memory using ELA's Device Manager Mobile application. although take into account that either voltage value or low percentage can be configured. There is no option for both parameters to select.
First thing you have to know before configuring a sensor is data protocol. For detailed ELA description about Bluetooth frame specifications please refer [https://elainnovation.com/wp-content/uploads/2020/10/BLE-Frame-specifications-11B-EN.pdf here.] To enable internal battery voltage in the scan response frame, battery voltage presence must be configured in the NFC memory using ELA's Device Manager Mobile application. although take into account that either voltage value or low percentage can be configured. There is no option for both parameters to select.
|Beacon ID
|Beacon ID
|}
|}
