Changes

These are instructions on how to easily configure EYE beacon with Teltonika Configurator on GH5200 device.<br>

These are instructions on how to easily configure EYE beacon with Teltonika Configurator on GH5200 device.<br>

<b>1.</b> First the device <b>Bluetooth settings</b> need to be configured. These are the required steps:<br>

<b>1.</b> First the device <b>Bluetooth® settings</b> need to be configured. These are the required steps:<br>

* Press Bluetooth settings

* Press Bluetooth® settings

* Turn on BT Radio by pressing Enable (hidden) or Enable (visible)

* Turn on BT Radio by pressing Enable (hidden) or Enable (visible)

<br>

<br>

====Protocol description====

====Protocol description====

At the highest-level Bluetooth LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.

At the highest-level Bluetooth® LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.

<br><br>

<br><br>

BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.

BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.