Changes

==Instructions==

==Instructions==

These are the steps that should be performed during the tests. These steps describe what should be done in case the data is received and also what to do if the data is not received.<br>

These are the steps that should be performed during the tests. These steps describe what should be done in case the data is received and also what to do if the data is not received.<br>

'''1)''' Connect FMX6 CAN1 High to schemes CAN High / CAN1 Low to schemes CAN Low - use ECAN adapter to avoid CAN line interruptions.<br>

'''1)''' Connect FMX6 CAN1 High to schemes CAN High / CAN1 Low to schemes CAN Low - '''use ECAN adapter to avoid CAN line interruptions.<br>'''

'''2)''' Turn on the vehicle Engine.<br>

'''2)''' Turn on the vehicle Engine.<br>

'''3)''' Send scanfms SMS/GPRS command again.<br>

'''3)''' Send [[FMC640_SMS/GPRS_command_list|scanfms SMS/GPRS command]].<br>

'''4)''' If response is 0,0,0,0... - change CAN1 baudrate from 250 to 500 kbps - note: do not change the baudrate with Engine/Ignition ON if FMX6 device is connected directly to CAN line of vehicle - ECAN connection is recommended in all cases.<br>

'''4)''' If response is 0,0,0,0... - change CAN1 baudrate from 250 to 500 kbps - '''note: do not change the baudrate with Engine/Ignition ON if FMX6 device is connected directly to CAN line of vehicle - ECAN connection is recommended in all cases.<br>'''

'''5)''' Send scanfms command again.<br>

'''5)''' Send scanfms command again.<br>

'''6)''' If response has active elements ..1,0,1,1,... - you can configure the FMS IO element accordingly.<br>

'''6)''' If response has active elements ..1,0,1,1,... - you can configure the FMS IO element accordingly.<br>

  Please send us the scanfms response and baudrate used. If you encounter any issues - please send the configuration of the device/GSM number/photos of the connection. <br>

  Please send us the scanfms response and baudrate used. If you encounter any issues - please send the configuration of the device/GSM number/photos of the connection. <br>

You can also send us a log file gathered by connecting the device to the PC and sending ".can_dbg:1" and ".can_dbg_filter:1" commands via the terminal application. Note: remember to send ".can_dbg:0" after the logging is done.<br>

You can also send us a log file gathered by connecting the device to the PC and sending ".can_dbg:1" and ".can_dbg_filter:1" commands via the terminal application. '''Note: remember to send ".can_dbg:0" after the logging is done.<br>'''

 

You can also get a remote log file by sending log2srv SMS/GPS command - log2srv 1,7,APN,APN_Login,APN_Password,Server_IP,Port,600,0 - make sure 7 filter is used instead of default 3. Additionally - send "can_dbg:1" and "can_dbg_filter:1" commands and turn of CAN logging with "can_dbg:1".<br>

You can also get a remote log file by sending log2srv SMS/GPS command - log2srv 1,7,APN,APN_Login,APN_Password,Server_IP,Port,600,0 - make sure 7 filter is used instead of default 3. Additionally - send "can_dbg:1" and "can_dbg_filter:1" commands and turn of CAN logging with "can_dbg:1".<br>

Instruction can be found by pressing here.<br>

Instruction can be found by [http://How_to_capture_CAN_adapter_log_from_FM_device%3F pressing here].<br>