Changes

<b>{{{description|Plug and Track real-time tracking terminal with GNSS, LTE CAT M1 and Bluetooth connectivity}}}</b>{{{pic|[[Image:FMM80A-2023-01-09-4000x4000.1.png|400px|right]]}}}

<b>{{{description|Plug and Track real-time tracking terminal with GNSS, LTE CAT M1 and Bluetooth® connectivity}}}</b>{{{pic|[[Image:FMM80A-2023-01-09-4000x4000.1.png|400px|right]]}}}

{{{fmb_powerup|# Power-up {{{model|FMM80A}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply {{{additional_power_supply|}}} using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}  

{{{fmb_powerup|# Power-up {{{model|FMM80A}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply {{{additional_power_supply|}}} using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}  

# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''{{{Bluetooth_connection| or '''Bluetooth''' connection:  

# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''{{{Bluetooth®_connection| or '''Bluetooth®''' connection:  

#* Using '''{{{usb_cable|Micro-USB}}} cable'''

#* Using '''{{{usb_cable|Micro-USB}}} cable'''

#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"

#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"

#* Using '''Bluetooth'''

#* Using '''Bluetooth®'''

#** {{{model|FMM80A}}} Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – “'''{{{model|FMM80A}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.}}}

#** {{{model|FMM80A}}} Bluetooth® is enabled by default. Turn on '''Bluetooth®''' on your PC, then select '''Add Bluetooth® or other device > Bluetooth®'''. Choose your device named – “'''{{{model|FMM80A}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.}}}

# You are now ready to use the device on your computer.

# You are now ready to use the device on your computer.

}}}

}}}