4,480
edits
Changes
Making Custom BLE Sensor configuration and preset (view source)
Revision as of 16:26, 28 December 2023
, 16:26, 28 December 2023Text replacement - "Bluetooth(?!®)" to "Bluetooth®"
==Disclaimer==
==Disclaimer==
[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth, '''please consider turning it off''' or '''change Bluetooth PIN''' to remove potential risks.
[[File:Alert.png|left|link=]] <br> If you are not using Bluetooth®, '''please consider turning it off''' or '''change Bluetooth® PIN''' to remove potential risks.
If you are using Bluetooth we strongly recommend '''using AES encryption''' for enhanced security.
If you are using Bluetooth® we strongly recommend '''using AES encryption''' for enhanced security.
== Introduction ==
== Introduction ==
Prerequisites:
Prerequisites:
# BT radio is enabled in the Bluetooth section of the configurator.
# BT radio is enabled in the Bluetooth® section of the configurator.
# Codec8extedended set in the System section of the configurator.
# Codec8extedended set in the System section of the configurator.
* Action = Save -> save to IO element.
* Action = Save -> save to IO element.
* IO = custom -> We do not know the protocol yet, so we use custom that can be used for HEX data.
* IO = custom -> We do not know the protocol yet, so we use custom that can be used for HEX data.
IO tab of configurator: enable BLE custom X where X is the sensor number in Bluetooth 4.0 section.
IO tab of configurator: enable BLE custom X where X is the sensor number in Bluetooth® 4.0 section.
