Changes

no edit summary
Line 47: Line 47:     
[[File:DashCam and FMC650 relay.png|frameless|928x928px]]
 
[[File:DashCam and FMC650 relay.png|frameless|928x928px]]
 +
 +
'''Two cameras FMC650 Installation with Ignition Source'''. To connect the two cameras to the FMC650 device, you have to make sure to connect 4 PIN's of the camera to the PIN's of your device correctly.
 +
 +
'''NOTE:''' Two cameras must be connected to the ignition source or another source, where then you turn off ignition camera will turn off in another case camera will drain the battery if you connect directly.
 +
 +
[[File:Ignition source two cameras.JPG|frameless|928x928px]]
 +
 +
'''Two cameras FMC650 Installation with Relay'''. If you need to receive additional data from the Two cameras or one of them when the ignition is off, you can also connect the camera to a power source using the relay, to control the power supply by turning on/off the camera. To find information on how to configure DOUT, please visit [[FMB setdigout|FMB DOUT]].
 +
 +
[[File:2 cameras dout.JPG|frameless|928x928px]]
    
{| class="wikitable"
 
{| class="wikitable"