6,023
edits
Changes
mLine 135:
Line 135: − − {| − {{#if:{{{DOUT_Overcurrent_protection|}}} − }} − |} − Line 472:
Line 466: − + − {|+ − {{#if:{{{Mounting_Guidelines|}}} Line 481:
Line 474: − }}+ − |}+ − + − {|+ − {{#if:{{{Accelerometer_delay|}}}+ + + + + + + Line 512:
Line 511: − }}+ − |}
Reverted edits by Jonas.sterbavicius (talk) to last revision by Karolis.C
}}
}}
|}
|}
===DOUT Overcurrent protection===
===DOUT Overcurrent protection===
DOUTs have overcurrent protection that triggers after the current exceeds 300 mA. This protection works by generating pulses on the hardware. When the firmware detects at least 20 impulses on a DOUT it turns off that DOUT for 5 minutes. During this time all scenarios that try to turn this DOUT on will fail.
DOUTs have overcurrent protection that triggers after the current exceeds 300 mA. This protection works by generating pulses on the hardware. When the firmware detects at least 20 impulses on a DOUT it turns off that DOUT for 5 minutes. During this time all scenarios that try to turn this DOUT on will fail.
{|
{|
{{#if:{{{Data_protocol|}}}
{{#if:{{{Data_protocol|}}}
'''Important''':If Auto Calibration is disabled, in order for the Eco/Green Driving to work propertly, the device must be mounted according to the TFT100 Mounting Guidelines
'''Important''':If Auto Calibration is disabled, in order for the Eco/Green Driving to work propertly, the device must be mounted according to the TFT100 Mounting Guidelines
}}
|}
=== Mounting Guidelines ===
=== Mounting Guidelines ===
The device should be mounted according to the picture below. Logo/Antenna must be facing up.
The device should be mounted according to the picture below. Logo/Antenna must be facing up.
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
===Accelerometer delay===
===Accelerometer delay===
For example, if the Movement Start Delay is set to 1s and Movement Stop Delay to 60s, the movement will be detected after 1s of moving and defined as stopped after 60s when device stopped moving.
For example, if the Movement Start Delay is set to 1s and Movement Stop Delay to 60s, the movement will be detected after 1s of moving and defined as stopped after 60s when device stopped moving.
{|
{|
{{#if:{{{PT_Tracking_mode|}}}
{{#if:{{{PT_Tracking_mode|}}}
