6,023
edits
Changes
mLine 115:
Line 115: − Line 133:
Line 132: + + + + + + + + + +
no edit summary
* Always: charger is always enabled, except if the battery is fully charged or 10-minute timeout has not passed since the device was turned on for faster FIX receiving.
* Always: charger is always enabled, except if the battery is fully charged or 10-minute timeout has not passed since the device was turned on for faster FIX receiving.
[[Image:Screenshot 2024-03-01 at 14-11-41 5.2. System - Mobility documentation.png]]
[[Image:Screenshot 2024-03-01 at 14-11-41 5.2. System - Mobility documentation.png]]
}}
}}
Lowest voltage to enabled DIN for 150V range - 9V
Lowest voltage to enabled DIN for 150V range - 9V
}}
}}
|}
|}
{|
{{#if:{{{TFT_DOUT Overcurrent protection|}}}
|
===DOUT Overcurrent protection===
===DOUT Overcurrent protection===
DOUTs have overcurrent protection that triggers after the current exceeds 300 mA. This protection works by generating pulses on the hardware. When the firmware detects at least 20 impulses on a DOUT it turns off that DOUT for 5 minutes. During this time all scenarios that try to turn this DOUT on will fail.
DOUTs have overcurrent protection that triggers after the current exceeds 300 mA. This protection works by generating pulses on the hardware. When the firmware detects at least 20 impulses on a DOUT it turns off that DOUT for 5 minutes. During this time all scenarios that try to turn this DOUT on will fail.
}}
|}
{|
{|
{{#if:{{{Data_protocol|}}}
{{#if:{{{Data_protocol|}}}
