Changes

==Movement settings==

==Movement settings==

[[File:TCT-Movement-1.png|right]]

[[File:TCT-Movement-1.png|500px|right]]

Movement source will be used to determine when a vehicle is on stop or moving.<br>

Movement source will be used to determine when a vehicle is on stop or moving.<br>

Possible movement sources:

Possible movement sources:

* '''Power voltage''' - Data acquisition > "moving" mode (Parameter state = 1) - when power voltage is >= low power voltage and <= high power voltage. By default low voltage is 13.2 V and high voltage is 30 V;

* '''Power voltage''' - Data acquisition > "moving" mode (Parameter state = 1) - when power voltage is >= low power voltage and <= high power voltage. By default low voltage is 13.2 V and high voltage is 30 V;

* '''DIN1''' - Data acquisition > "moving" mode (Parameter state = 1) - when voltage measured by DIN 1 is higher than 7.5V. Data acquisition > "on stop" mode (Parameter state = 0) - when voltage measured by DIN 1 is lower than 7.5V.

* '''DIN1''' - Data acquisition > "moving" mode (Parameter state = 1) - when voltage measured by DIN 1 is higher than 7.5V. Data acquisition > "on stop" mode (Parameter state = 0) - when voltage measured by DIN 1 is lower than 7.5V.

==GNSS settings==

==GNSS settings==