137
edits
Changes
no edit summary
==Configuration password==
==Configuration password==
[[File:Configuration password.png|right|500 px]]
Protects the device from unauthorized access while using USB or Bluetooth to make any form of configuration changes.
Protects the device from unauthorized access while using USB or Bluetooth to make any form of configuration changes.
*'''Set password''' - Set the primary password for the device. Required to access the device every time using the USB or via Bluetooth connection.
*'''Set password''' - Set the primary password for the device. Required to access the device every time using the USB or via Bluetooth connection.
*'''Recovery password (optional)''' - in the event that the primary password is forgotten, the recovery password can be used as a backup to unlock the device configuration.
*'''Recovery password (optional)''' - in the event that the primary password is forgotten, the recovery password can be used as a backup to unlock the device configuration.
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
==GNSS settings==
==GNSS settings==
==Power Saving settings==
==Power Saving settings==
[[File:Power Saving Settings.png|right|500 px]]
Puts the device into a power-saving mode, preserving the power consumption from the external source or the internal battery. The device enters this mode after the conditions are met.
Puts the device into a power-saving mode, preserving the power consumption from the external source or the internal battery. The device enters this mode after the conditions are met.
*The selectable modes are as follows:
*The selectable modes are as follows:
'''Disable''' - Normal mode, no internal battery saving.
'''Disable''' - Normal mode, no internal battery saving.
'''Ultra Deep Sleep''' - The device turns off almost everything to save maximum power. The device exits this mode when DIN turns 1 (ON).
'''Ultra Deep Sleep''' - The device turns off almost everything to save maximum power. The device exits this mode when DIN turns 1 (ON).
<br>
<br>
<br>
<br>
==Time synchronization settings==
==Time synchronization settings==
'''After ignition ON'''—Battery will start charging when the ignition source is turned ON <br>
'''After ignition ON'''—Battery will start charging when the ignition source is turned ON <br>
'''Always'''—Battery will charge all the time <br>
'''Always'''—Battery will charge all the time <br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
==LED settings==
==LED settings==
