57
edits
Changes
no edit summary
User can select which source will be used to determine when vehicle is on stop or moving. When multiple are selected, if any of selected are active, Vehicle MOVING mode is used.
User can select which source will be used to determine when vehicle is on stop or moving. When multiple are selected, if any of selected are active, Vehicle MOVING mode is used.
Available movement source:
Available movement source:
[[Image:Screenshot 2024-03-01 at 14-04-10 5.2. System - Mobility documentation.png|right|300px]]
[[Image:Screenshot 2024-03-01 at 14-04-10 5.2. System - Mobility documentation.png|right]]
* Ignition: checks ignition settings which depends on Ignition Source settings;
* Ignition: checks ignition settings which depends on Ignition Source settings;
|
|
|===Power On By USB/Charger===
|===Power On By USB/Charger===
[[Image:PT Power on by usb.png|200px|right]]
[[Image:PT Power on by usb.png|right]]
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
Device supports two working modes: normal mode, where the device works as usual, and charging mode, which is entered when ''Power On By USB/Charger'' parameter is <b>disabled</b>. To enter normal mode, device can be turned on by power button or by USB charger, if ''Power On By USB/Charger'' parameter is set to <b>Enable</b>.
Device supports two working modes: normal mode, where the device works as usual, and charging mode, which is entered when ''Power On By USB/Charger'' parameter is <b>disabled</b>. To enter normal mode, device can be turned on by power button or by USB charger, if ''Power On By USB/Charger'' parameter is set to <b>Enable</b>.
|
|
|===Continuous Charging Mode===
|===Continuous Charging Mode===
[[Image:PT continuous charging.png|200px|right]]
[[Image:PT continuous charging.png|right]]
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
'''Note''': This feature is available forwards from FW version 55.02.03.Rev.05<br>
Battery protection mode to extend battery life. Should only be used when device is permanently connected to external charger. When enabled charge current is reduced preventing charging to maximum voltage. This results in lower battery temperature and extended battery lifetime. Please note, this also increases battery charge time and reduces overall charge to around 85%.
Battery protection mode to extend battery life. Should only be used when device is permanently connected to external charger. When enabled charge current is reduced preventing charging to maximum voltage. This results in lower battery temperature and extended battery lifetime. Please note, this also increases battery charge time and reduces overall charge to around 85%.
|
|
|==Location Settings==
|==Location Settings==
[[Image:Location_settings_{{{model|X}}}.png|right|300px]]
[[Image:Location_settings_{{{model|X}}}.png|right]]
}}
}}
|}
|}
{|
{|
{{#if:{{{AT_no_show|}}}
{{#if:{{{TFT_show|}}}
|
|
|==Static Navigation Settings==
|==Static Navigation Settings==
[[Image:Static_navigation_PT.png|right]]
[[Image:Static_navigation_TFT.png|right]]
Static Navigation mode is a filter, which filters out track jumps when the object is stationary. If static navigation filter is disabled, it will apply no changes to GPS data. If static navigation filter is enabled, it will filter changes in GPS position if no movement (as defined by configured movement source) or ignition (as defined by configured ignition source) is detected. It allows filtering GPS jumps when the object is parked (not moving) and GPS position is still traced. <br />
Static Navigation mode is a filter, which filters out track jumps when the object is stationary. If static navigation filter is disabled, it will apply no changes to GPS data. If static navigation filter is enabled, it will filter changes in GPS position if no movement (as defined by configured movement source) or ignition (as defined by configured ignition source) is detected. It allows filtering GPS jumps when the object is parked (not moving) and GPS position is still traced. <br />
Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation.
Additionally, user can choose which source (movement or ignition) is used to activate/deactivate static navigation.
<br>
<br>
}}
|}
{|
{{#if:{{{PT_show|}}}
|
|==Static Navigation Settings==
[[Image:Static_navigation_PT.png|right]]
Static Navigation mode is a filter, which filters out track jumps when the object is stationary. If static navigation filter is disabled, it will apply no changes to GPS data. If static navigation filter is enabled, it will filter changes in GPS position if no movement is detected. It allows filtering GPS jumps when the object is not moving and GPS position is still traced. <br />
}}
}}
|}
|}
<tr style="vertical-align: top; text-align: left;">
<tr style="vertical-align: top; text-align: left;">
<td style="width:75%">User can choose sleep mode. More about sleep modes can be found {{{ctrSleepModes|[[{{{model|X}}} Sleep modes|here]]}}}. <br>
<td style="width:75%">User can choose sleep mode. More about sleep modes can be found {{{ctrSleepModes|[[{{{model|X}}} Sleep modes|here]]}}}. <br>
{{{PT_movement_source|If any of selected movement sources are active, movement mode will be activated. If all selected sources are inactive STOP mode will be enabled. [[Image: PT Sleep exit Source.png]]}}}
{{{PT_movement_source|If any of selected movement sources are active, movement mode will be activated. If all selected sources are inactive STOP mode will be enabled.}}}
</td>
</td>
<td>[[Image:Sleep_mode_{{{model|X}}}.png|right]]</td>
<td>[[Image:Sleep_mode_{{{model|X}}}.png|right]]</td>
{|
{|
{{#if:{{{TFT_ignition_source|}}}
{{#if:{{{TFT_show|}}}
|
|
==Ignition Source==
|==Ignition Source==
[[Image:Mob_Ignition_source.png|right]]
[[Image:Mob_Ignition_source.png|right]]
User can choose an ignition source from digital input (1, 2 or 3), power voltage, CAN and accelerometer. More than one ignition source can be selected at the same moment. When there are 2 or more sources selected, at least one condition has to be met to change Ignition status. Example: DIN1 and Accelerometer are selected as Ignition source. When the device detects movement, Ignition status will change to 1, regardless that DIN1 value is 0. User can select movement start and movement stop delay time - those parameters are used when accelerometer is selected as an ignition source. Ignition status is used in power management and the following functionalities: Eco/Green driving, Excessive idling, Over speeding, Towing detection and trip.
User can choose an ignition source from digital input (1, 2 or 3), power voltage, CAN and accelerometer. More than one ignition source can be selected at the same moment. When there are 2 or more sources selected, at least one condition has to be met to change Ignition status. <br>
''For example'', DIN1 and Accelerometer are selected as Ignition source. When the device detects movement, Ignition status will change to 1, regardless that DIN1 value is 0. <br>
Ignition status is used in power management and the following functionalities: Eco/Green driving, Excessive idling, Over speeding, Towing detection and trip.
<br><br><br>
}}
}}
|}
|}
|}
|}
{|
{{#if:{{{GH_TMT_section|}}}
{{#if:{{{GH_TMT_section|}}}
|
|
