Tachograph files download with Wialon platform

From Wiki Knowledge Base | Teltonika GPS

Introduction[edit | edit source]

This step by step instruction shows how with Professional trackers via “Wialon” platform from VDO Digital – DTCO 1381 and Stoneridge download DDD files. To download DDD files from tachograph to device need send GPRS command which initiate DDD files download, so Teltonika device should be connected to server.

Preparing company card[edit | edit source]

Download “Tacho Card Authorizer” application from following link: “Tacho Card Authorizer”
Run tca.exe file. Press Edit -> Server Settings;

Tacho Card Authorizer.png

In pop up window fill like shown. IP: 193.193.165.165, PORT: 21077. Please make note that IP address depends of server which you use. It automatically appear in Wialon when registering object;

Tacho Card Authorizer 2.png

Connect card reader with company card to PC and press “Authorize Company Card”;

TachoCardAuthorizer3.png

Copy company card serial number;

TachoCardAuthorizer4.png

Wialon server configuration[edit | edit source]

Device registration
Login to your “Wialon” account and go to “Units” tab. Press “New” to add new object;

WialonNew Object.png


In General tab fill device information. Enter device name, select device type and enter IMEI. Server address will appear automatically depending on the selected device type;

Wialon New Unit.png


Company card registration
In “Wialon” platform go to “Units” tab, select your FM6/FMB6 device and press “Unit properties”;

WialonCCR.png

In General tab, press “Configure device for the unit”;

Wialon General tab.png

Scroll down and in “Company card SN” field insert company card SN number which was copied in TCA application;

Wialon Company Card.png


Creating GPRS command
Go to “Command” tab to create command for DDD files download;

Wialon Command tab.png

Create GPRS command as shown. Enter your command name. Command type select “Query DDD (query_ddd)” – this is command to request all data from driver card or tachograph. Recommend to use Virtual channel for DDD files download – if device does not have GPRS session active or is not able to establish connection, GPRS command for DDD file download will be sent once GPRS connection recovers. TCP channel also can be used and the main difference from Virtual channel is that GPRS command will not be delivered if device will not have active GPRS session or connection.

Wialon New Command.png

Scroll down and enter remaining parameters and choose file type which you want to download. IP 193.193.165.165 and PORT: 21807. IP address and PORT automatically appear in Wialon when registering object depending on the selected device type;

Wialon Remaining Parameters.png

Teltonika device configuration[edit | edit source]

Configure FMB640 device to send data to Domain: 193.193.165.165 and PORT: 21756. IP address and PORT automatically appear in Wialon when registering object depending on the selected device type;

Configurator1.png

To initiate tachograph files download, device should keep data link with wialon server. In order to keep constant link with server – recommended to increase “Open link timeout” parameter for 3600s or more;

Configurator2.png

Tachograph files download[edit | edit source]

Sending GPRS command to device
To send GPRS command, device should be connected to server. In Monitoring tab under “Connection state” you will see if device is connected. If you see green circle, it’s mean that device is online and you can start DDD files download.
Select device from which you want download DDD files, press “Open additional menu” and select “GPRS command”;

Wialon Select device.png

Choose created earlier command and send it to device;

Wialon Choose created.png

When command will be successfully sent to device and when DDD file will be downloaded you will see it in notification window;

Wialon11.png

Configuring periodical Download
In Wialon platform it is possible to create schedule for periodical tachographs files download. Once you will create action, server will automatically send GPRS command to device to initiate DDD files download.
Go to Jobs tab and press “Create a job to perform scheduled actions”;

Wialon12.png


In pop up window select “Execute a command over unit(s)” and press next;

Wialon13.png

Select devices for which you want to create schedule and press next;

Wialon14.png

Select command which should be executed and press next;

Wialon15.png

Enter name of schedule, then set how often schedule should be executed and press ok.

Wialon16.png


Tachograph files storage[edit | edit source]

With your logins login to Wialon Disketa, where all DDD files is stored.

Disketa.png

Choose device;

Disketa1.png

Select “Protected”;

Disketa2.png

Select “tachograph”;

Disketa3.png

There you will find all downloaded files;

Disketa4.png

In case if in Wialon is created driver with unique identification number from driver card, then tachograph files will be moved next to this driver.