Template:FMA2 Installation instruction
Possible mounting zones
Trucks[edit source]
It is strongly recommended to mount FMB2YX outside of the vehicle with the sticker direction to the sky.
Most commercial trucks have plastic hood in front of the vehicle. It is recommended to mount FMB2YX under the hood. Power cord output of the device should be at the bottom. If it is not possible, if a front hood is made of some kind of metal, the device can be mounted inside the car on the front panel as close as possible to the front window.
Tractors[edit source]
It is strongly recommended to mount FMB2YX outside of the vehicle with the sticker direction to the sky.
Motor bikes[edit source]
FMB2YX device should be mounted on outside.
FMB2YX cannot be mounted under the seat!
Light vehicles[edit source]
Most light vehicles has oblique front window that opens most part of interior front panel. FMB2YX can be mounted under the plastic panel behind the front window, with the sticker
direction to a window (sky).
Recommended mounting positions[edit source]
Best FMB2YX mounting position is outside of vehicle with any metal above the device.
Recommended deviation from horizontal axis of vehicle max 3-5°.
Mounting position and recommended deviation from longitudinal axis of vehicle ±2°.
Restrictions[edit source]
FMB2YX device can not be mounted inside in the vehicle door!
FMB2YX device cannot be mounted inside the vehicle!
Connecting power wires[edit source]
- Device should be connected directly to battery. Power supply: 6V/12V/24V.
- If FMB2YX is used in 6V system and power cables are extended.
Extension cable resistance should be less than 60 mΩ in sum of both, positive and negative, wires. 30 mΩ for single wire.