Template:FMM0 First start card

From Wiki Knowledge Base | Teltonika GPS
Qsg rut950 teltonika.PNG

Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

FMM001 00.png

How to insert Micro-SIM card and connect battery

  1. Gently remove FMM001 cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
  4. Attach device cover back.

Device is ready to be connected.

Fmm001 cover 1.pngFmm0001 cover 2.pngFmm001 battery 1.pngFmm001 cover 3.png

Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.