From Teltonika Telematics Wiki
| VERSION
|
RELEASE DATE
|
CONFIGURATOR CHANGES
|
FIRMWARE CHANGES
|
55.01.02.Rev.200
1.5.15_C.232
|
2021.11.15
|
- Fixed In Use satellites not display issue
- Add missing parameter IDs in tooltips
|
- Added XT26G01CWSIGT and GD5F1GQ5UE NAND flash support
- The maximum battery charging temperature changed from 50°C to 45°C
- Maximum operating temperature changed from 65°C to 59°C
- Fixed Remote Connection indication.
- SMS commands will return time with applied time zone
- Fixed FW version display in FOTA WEB
- Fixed SMS send and Call issue, when GPRS send period is set to 0 sec.
- Changed minimum charging temperature from -10°C to 1°C
- Fixed configuration saving error. Which was happening due FW version change
- Increased BLE scan stability.
|
| VERSION
|
RELEASE DATE
|
CONFIGURATOR CHANGES
|
FIRMWARE CHANGES
|
55.00.08.Rev.349
1.5.15_C.228
|
2021.05.07
|
- Added configurable Proximity indication pause
- Added option 'Advertise only' for proximity while charging
|
- Added configurable Proximity indication pause.
- Changed default Scan Window and Scan Interval
- Added option 'Advertise only' for proximity while charging
- Corrections for data sending via RUTX
- If Beacon record sending is configured to be 'Eventual', send only if device sees any beacons
|
55.00.08.Rev.344
1.5.15_C.225
|
2021.01.14
|
- Added Proximity Violator type iBeacon
|
- Improved proximity feature stability.
- Reworked device connection with RUTX.
- Improved proximity advertising scanning stability.
- Safe charging improvements for GH5200.
- Added feature which allows to use Beacons with proximity feature.
- Fixed device Power on from USB, when feature is disabled.
- Proximity improvements to support several devices at the same time.
|
55.00.08.Rev.337
1.5.15_C.222
|
2020.10.23
|
- Added Proximity with RUTX setting
- Added Proximity RDDI exit threshold setting
- Added Proximity RDDI moving average samples setting
|
- Improved RSSI level calculation logic, averaging according to configurated sample size was implemented.
- Added BLE advertising interval parameter.
- Added duplicate scan filter to improve BLE performance.
|
55.00.08.Rev.335
1.5.15_C.219
|
2020.10.09
|
- Added Teltonika beaons setting
|
- Improved BLE power level parameters.
- Added Proximity RSSI exit threshold parameter.
- Added Proximity RSSI moving average parameter.
- Reworked generation of Proximity records.
- Changed Proximity record priority from Low to High.
- Reworked Proximity record sending according to Data Acquisition.
|
55.00.08.Rev.334
1.5.15_C.219
|
2020.09.28
|
- Added Teltonika beaons setting
|
- Added new beacon detection option Teltonika (device only detects Teltonika devices).
- Improved Proximity detection, works with Beacon Detection All and Beacon Detection Teltonika settings.
- Improved Proximity contact duration calculation.
- Improved Beacon detection stability.
|
55.00.08.Rev.332
1.5.15_C.217
|
2020.09.28
|
- Added Home Zone on Exit on entrance settings
|
- Improved Proximity record sending.
- Reworked Home Zone on exit and on entrance event generation.
- Improved Power Off event delay.
- Corrected Power On/Off event logic.
- Reworked Proximity SMS, IMEI is sent instead of BLE MAC
- Proximity Service ID was removed.
|
