Why does TAT141 not send data?

From Wiki Knowledge Base | Teltonika GPS
Main Page > Autonomous Trackers > TAT141 > TAT141 FAQ > Why does TAT141 not send data?

1. Make sure Tracking settings are configured correctly, according to these instructions

2. Check if your APN , Domain and Port entered correctly and GPRS data is Enabled.
Apntat.png


3. In some rare cases it helps to clear the device's memory:

Reset SMS.png




















It could be done remotely using SMS/GPRS command sdformat.
More info about the commands here.

4. Make sure the device is turned ON.
Tatnew.jpg













Bw nb.png NOTE! Please do not change Open Link Timeout in TAT141 configuration

GPRS -> Record Settings -> Open Link Timeout -> Should be set to [30] / Response Timeout -> Should be set to [30] / Network Ping Timout -> Should be set to [0]

Bw nb.png NOTE! Scheduler days has to be selected to enable data sending. More info here.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Why_does_TAT141_not_send_data%3F&oldid=87553"