2,556
edits
Changes
How to capture CAN adapter log from FMX1YX (view source)
Revision as of 14:28, 3 July 2020
, 14:28, 3 July 2020no edit summary
Here are steps how to capture LV-CAN200, ALL-CAN300, CAN-CONTROL log from FMB1YX series devices.<p>This functionality is available after '''03.08.00''' firmware version.</p>
Here are steps how to capture LV-CAN200, ALL-CAN300, CAN-CONTROL log from FMB1YX series devices.<p>This functionality is available after '''03.08.00''' firmware version.</p>
#Make sure that CAN adapter is [https://youtu.be/V9RTdSy1E8w connected properly] to the vehicle and to FMB1YX series device.
#Make sure that CAN adapter is [https://youtu.be/V9RTdSy1E8w connected properly] to the vehicle and to the FMB1YX series device.
#'''Start vehicle engine'''.
#'''Start vehicle engine'''.
#Send following '''SMS commands''' to FMX1YX device:
#Send following '''SMS commands''' to FMX1YX device:
#These log (dump) files can be read only with '''special software'''. Provide these files to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation.
#These log (dump) files can be read only with '''special software'''. Provide these files to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation.
[[Category:Fleet management FAQ]]
[[Category: Fleet management FAQ]]