Changes

Here are steps how to capture LV-CAN200, ALL-CAN300, CAN-CONTROL log from FMB1YX series devices.<p>This functionality is available after '''03.08.00''' firmware version.</p>

Here are steps how to capture LV-CAN200, ALL-CAN300, CAN-CONTROL log from FMB1YX series devices.<p>This functionality is available after '''03.08.00''' firmware version.</p>

#Make sure that CAN adapter is [https://youtu.be/V9RTdSy1E8w connected properly] to the vehicle and to FMB1YX series device.

#Make sure that CAN adapter is [https://youtu.be/V9RTdSy1E8w connected properly] to the vehicle and to the FMB1YX series device.

#'''Start vehicle engine'''.

#'''Start vehicle engine'''.

#Send following '''SMS commands''' to FMX1YX device:  

#Send following '''SMS commands''' to FMX1YX device:  

#These log (dump) files can be read only with '''special software'''. Provide these files to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation.

#These log (dump) files can be read only with '''special software'''. Provide these files to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation.

[[Category:Fleet management FAQ]]

[[Category: Fleet management FAQ]]