Changes

The main parameters that you need to configure will be the SIM1 or SIM2 APN password and APN username so that you will protect the device from another user to send SMS/GPRS commands to the device.

The main parameters that you need to configure will be the SIM1 or SIM2 APN password and APN username so that you will protect the device from another user to send SMS/GPRS commands to the device.

The second step will be to configure the server to which you will send the data from the device and tachograph to properly configure the server you need to select which server you will be using, more platforms you can find here [https://wiki.teltonika-gps.com/view/Fleet_Management_platforms Fleet Management platforms]

The second step will be to configure the server PORT DOMAIN and what sending protocol will be TCP or UDP depends on the server to which you will send the data from the device and tachograph ( also you can configurate back up server if server #1 will not available to receive data) to properly configure the server you need to select which server you will be using, more platforms you can find here [https://wiki.teltonika-gps.com/view/Fleet_Management_platforms Fleet Management platforms]

In the picture below you can find were located GPRS settings and what settings need to be configured:

In the picture below you can find were located GPRS settings and what settings need to be configured:

 

==='''3. Configuring Digital Tachograph Monitoring:'''===

==='''3. Configuring Digital Tachograph Monitoring:'''===