Difference between revisions of "Template:FMB SMS/GPRS Commands"

Latest revision as of 07:47, 13 September 2024

Commands apply for these devices:

All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.
If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.

SMS command structure:

<SMS login><space><SMS password><space><command><space><value>

SMS command getinfo example:

If you have set SMS login and password: login pass getinfo
If SMS login and password are not set leave two spaces before command: getinfo

GPRS commands require Codec 12 protocol.

To search for compatible products, Expand all content

Common commands

Command	Description	Response	HW Support	Parameter Group
getinfo	Device runtime system information.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getver	Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getstatus	Modem Status information.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getgps	Current GPS data, date and time.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getio	Readout analog input,digital input and output.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
ggps	Returns location information with Google maps link.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
readio #	Returns IO status, # AVL ID.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
cpureset	Resets device	No	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
fwstats	Get data about FW and restarts	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getrecord	SMS command initiates saving and sending of high priority record.	No	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getimeiccid #	Response is sent to SMS/GPRS command sender and also to GSM number provided. # - GSM number using international format e.g. 37069012345	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getimsi	Sends the IMSI number of the SIM card inserted as a response to the sender. If two SIM cards are inserted in the device, the response will be the IMSI number of the currently active SIM card. Note: This command is supported from 03.10.02 firmware version.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getops	Returns list of all currenty visible operators.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
allver	Responds with information about hardware and firmware versions and storage space	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getparam #	Returns selected parameter value. # - first ID value. # - second ID value. # - third ID value. SMS command is limited to 160 characters.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
getparam #;#;…		Yes		Common commands
setparam #:#	Sets selected parameter value [Parameter ID] : [New Parameter Value] ; [Parameter ID] : [New Parameter Value]... SMS command is limited to 160 characters.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
setparam #:#;#:#;…		Yes		Common commands
flush #,#,#,#,#,#,#	Redirects device to other server. 1.# - IMEI. 2.# - APN. 3.# - LOGIN. 4.# - PASS. 5.# - IP. 6.# - PORT. 7.# - MODE (0-TCP/1-UDP).	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
countrecs	Returns records number.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
web_connect	Forces device to connect to Fota WEB immediately.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
deleterecords	Delete all records from SD card.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
setdigout ## Y1 Y2 Z1 Z2	Set digital output. 1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1. 2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). Z1 – maximum speed value for DOUT1 if needed. Z2 – maximum speed value for DOUT2 if needed.	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB900 FMB910 FMB920 FMB962 FMB964 FMB202 FMB204 FMB209 FMC125 FMC920 FMM125 FMU125 FMC130 FMM130 FMM920 FMU130 FMU126 MSP500	Common commands
setigndigout ### Y1 Y2 Y3	Set digital output when ignition is off. 1.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1. 2.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2. 3.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT3. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). Y3 – timeout value for DOUT3 if needed (in seconds).	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB900 FMB910 FMB920 FMB962 FMB964 FMB202 FMB204 FMB209 FMC125 FMC920 FMM125 FMU125 FMC130 FMM130 FMM920 FMU130 FMU126 MSP500	Common commands
battery	Returns battery state info.	Yes	FMBXXX FMB001 FMC001 FMM001 FMB002 FMB003 FMB010 FMB020 FMB120 FMB122 FMB125 FMB130 FMB140 FMB910 FMB920 FMB962 FMB964 FMB202 FMB204 FMB208 FMB209 FMC125 FMM125 FMU125 FMU126 FMC130 FMM130 FMU130 MSP500 FMT100 FMP100 FMC800 FMM800 FMM80A FMC920 FMM920	Common commands
wdlog	Returns all information about 'watch dogs'	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
defaultcfg	Load default configuration.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
setkey # #	Add new or change current configuration keyword. If device is locked, keyword cannot be changed. 1.# - old keyword (if adding new keyword space). 2.# - new keyword.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
delkey #	Remove existing keyword (If device is locked, keyword cannot be changed). # - old keyword.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
bbread #	Return black box information (HEX value of event ID and HEX value of custom data field (optional)). # - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
bbinfo #	Return same information as bbread command but additional all events timestamp is written in HEX. # - returns entered number of latest events. When # is omitted the latest events are packed to single SMS.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands
sdformat	Format SD card.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Common commands

Bluetooth Commands

Command	Description	Response	HW Support	Parameter Group
btgetlist #	Returns requested Bluetooth list. # - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected, 3 – Discovered BT4/BLE devices).	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Bluetooth commands
btscan	Starts Bluetooth scan.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Bluetooth commands
btvisible #	Sets Bluetooth to visible with TMO. # - visibility TMO (from 1 to 255 seconds).	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Bluetooth commands
btrelease #	Disconnects from current device and pauses auto connect functionality for TMO. # - none or TMO (from 1 to 255 seconds).	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Bluetooth commands
btunpair #	Unpair Bluetooth device. # - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Bluetooth commands

Commands Related to Features

Command	Description	Response	HW Support	Parameter Group
fc_reset	Resets fuel consumption parameters.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Commands related to features
towingreact	Towing reactivation.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Commands related to features
auto_calibrate:get	Returns the state of calibration.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Commands related to features
odoset:#	Set total odometer value. # - new odometer value in km.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Commands related to features
odoget	Display current odometer value.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Commands related to features
go2sleep	Puts device to sleep ignoring going to sleep condition and stays asleep for the set time. Note: This command is supported from 03.27.10.Rev.482 firmware version.	Yes	FMB965 FMB930	Commands related to features
on_demand_trackingX	X=0 – Stops Tracking on Demand functionality. X=1 – Starts Tracking on Demand functionality. X=2 – Generates one high priority record and inititates data sending to server. Note: This command is supported from 03.25.06 firmware version.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	Commands related to features

OBD Commands

Command	Description	Response	HW Support	Parameter Group
obdinfo	Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all available information from OBD.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	OBD Commands
faultcodes	Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all visible fault codes.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	OBD Commands
cleardtc	Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Command clears all vehicle stored fault codes.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	OBD Commands
getvin	Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays vehicle VIN code.	Yes	FMBXXX FMB001 FMC001 FMB010 FMB110 FMB120 FMB122 FMB125 FMB130 FMB140 FMB150 FMC150 FMM150 FMB900 FMB920 FMB202 FMB204 FMB206 FMT100 FMP100 FMC001 FMC125 FMC130 FMC920 FMM001 FMM125 FMM130 FMC800 FMM800 FMM80A FMC880 FMM880 FMM920 FMC250	OBD Commands

CAN Adapter Commands

Command	Description	Response	HW Support	Parameter Group
lvcansetprog #	Set program number to CAN Adapter # - three to five digit vehicle specific number	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcangetprog	Get program number from CAN Adapter	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcangetinfo	Get information about connected CAN adapter	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcansimpletacho #	Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte).	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanclear #	Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted))..	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanfaultcodes	Read DTC fault codes.	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanopenalldoors	Toggle CAN-CONTROL to open [unlock] all doors	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanclosealldoors	Toggle CAN-CONTROL to close [lock] all doors	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanopentrunk	Toggle CAN-CONTROL to open [unlock] trunk	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanblockengine	Toggle CAN-CONTROL to block vehicle engine (if command is not* supported, please, visit FAQ*)	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanunblockengine	Toggle CAN-CONTROL to unblock vehicle engine (if command is not* supported, please, visit FAQ*)	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanturninglights	Toggle CAN-CONTROL to flash lights One flash of all turn lights ordered trough accidental / blinking turn light switch	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcanhorn	Toggle CAN-CONTROL to activate single horn sound	Yes	FMBXXX FMB110 FMB120 FMB122 FMB125 FMU125 FMC125 FMM125 FMB130 FMU130 FMC130 FMM130	CAN Adapter Commands
lvcansetting#,#	This command is used to set specific counters for vehicles. From that moment of setting the value, vehicle will continue to count from the specified value. 1.#: 0 – setting total engine work time (seconds) 1 – setting total mileage of the vehicle (km) 2 – resetting total fuel consumption to 0 is available (liters) 3 – setting total CNG use (kg) 4 – setting electric engine work time (seconds) 5 – setting wheel speed sensor impulses (impulses) 2.# - value(0 to 0xFFFFFFFF or ? (? – is used to get the current setting value)) Note: This command is supported from 03.25.15.Rev.145 firmware version.	Yes	FMB140	CAN Adapter Commands
lvcanrefresh	This command forces FMB1YX connection to FOTA WEB to report current CAN adapter status. Note: This command is supported from 03.25.16.Rev.281 firmware version.	Yes	FMB140	CAN Adapter Commands
lvcanreset	This command forces CAN adapter reset. Note: This command is supported from 03.25.16.Rev.281 firmware version.	Yes	FMB140	CAN Adapter Commands
lvcancheck	This command reports CAN lines connection information. Note: This command is supported from 03.25.16.Rev.281 firmware version.	Yes	FMB140	CAN Adapter Commands

Namespaces

Variants

Views

More

Search

Difference between revisions of "Template:FMB SMS/GPRS Commands"

Latest revision as of 07:47, 13 September 2024

Commands apply for these devices:

Contents

Common commands

Bluetooth Commands

Commands Related to Features

OBD Commands

CAN Adapter Commands

Navigation menu

Personal tools

NAVIGATION

Tools

Categories

@@ Line 105: / Line 105: @@
 -->
 ===Commands apply for these devices:===
-[[FMB001]] [[FMB010]] [[FMB002]] [[FMB020]] [[FMB110]] [[FMB120]] [[FMB122]] [[FMB125]] [[FMB130]] [[FMB202|FMB202]] [[FMB204|FMB204]] [[FMB208|FMB208]] [[FMB900]] [[FMB920]] [[FMB962|FMB962]] [[FMB964|FMB964]] [[FM3001]] [[FMT100]] [[FMC001]] [[FMM001]] [[FMC125]] [[FMC130]] [[FMM125]] [[FMM130]] [[FMU125]] [[FMU126]] [[FMU130]] [[MTB100]] [[FMB140]]
 All commands are case sensitive. When user tries to send SMS/GPRS message to device that operates in Deep Sleep mode, it cannot arrive to it because the GSM/GPRS module is disabled most of the time. Device will receive the SMS message when it exits Deep Sleep mode, but GPRS commands will not be received after exiting Deep Sleep Mode.<br />If the device is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
@@ Line 211: / Line 209: @@
      </tr>
   <tr>
-         <td style="text-align: center;">''cpureset''</td>
+         <td style="text-align: center;">''[[FMB cpureset|cpureset]]''</td>
-         <td style="text-align: left;">resets device</td>
+         <td style="text-align: left;">Resets device</td>
          <td style="text-align: center;">No</td>
          <td style="text-align: center;">
@@ Line 234: / Line 232: @@
   <tr>
          <td style="text-align: center;">''getrecord''</td>
-         <td style="text-align: left;">SMS command initiates saving and sending of high priority record</td>
+         <td style="text-align: left;">SMS command initiates saving and sending of high priority record.</td>
          <td style="text-align: center;">No</td>
          <td style="text-align: center;">
@@ Line 263: / Line 261: @@
 <br />
 <font size="-2"><strong>Note: This command is supported from 03.10.02 firmware version.</strong></font></td>
+        <td style="text-align: center;">Yes</td>
+        <td style="text-align: center;">
+<div class="mw-customtoggle-56" style="margin:0 auto; text-align: center; overflow:auto;">
+FMBXXX
+<div class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB}}</div>
+</div></td>
+        <td style="text-align: center;">Common commands</td>
+    </tr>
+ <tr>
+        <td style="text-align: center;">''[[FMB getops|getops]]''</td>
+        <td style="text-align: left;">Returns list of all currenty visible operators.
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 347: / Line 356: @@
   <tr>
          <td style="text-align: center;">''web_connect''</td>
-         <td style="text-align: left;">Forces device toc onnect to Fota WEB immediately.</td>
+         <td style="text-align: left;">Forces device to connect to Fota WEB immediately.</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 376: / Line 385: @@
 		Z1 – maximum speed value for DOUT1 if needed.<br/>
 		Z2 – maximum speed value for DOUT2 if needed.}}}</td>
+        <td style="text-align: center;">Yes</td>
+        <td style="text-align: center;">
+<div class="mw-customtoggle-20" style="margin:0 auto; text-align: center; overflow:auto;">
+FMBXXX
+<div class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_DOUT1}}</div>
+</div></td>
+        <td style="text-align: center;">Common commands</td>
+    </tr>
+ <tr>
+        <td style="text-align: center;">{{{cmd_setdigout|''[[FMB setigndigout|setigndigout]] ### Y1 Y2 Y3''}}}</td>
+        <td style="text-align: left;">Set digital output when ignition is off.{{{txt_setigndigout|<br/>
+.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT1.<br/>
+.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT2.<br/>
+.# – 0; 1 or ? (0 - OFF, 1 – ON, ? - Ignore) for DOUT3.<br/>
+		Y1 – timeout value for DOUT1 if needed (in seconds).<br/>
+		Y2 – timeout value for DOUT2 if needed (in seconds).<br/>
+		Y3 – timeout value for DOUT3 if needed (in seconds).<br/>
+		}}}</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 474: / Line 501: @@
 FMBXXX
 <div class="mw-collapsible mw-collapsed">{{Template:FMB AVL ID all FMB|without_sd_status=}}</div>
-</div></td>
-        <td style="text-align: center;">Common commands</td>
-    </tr>
- <tr>
-        <td style="text-align: center;">''getrecord''</td>
-        <td style="text-align: left;">SMS command initiates saving and sending of high priority record.</td>
-        <td style="text-align: center;">No</td>
-        <td style="text-align: center;">
-<div class="mw-customtoggle-28" style="margin:0 auto; text-align: center; overflow:auto;">
-FMBXXX
-<div class="mw-collapsible mw-collapsed">{{Template:FMB AVL ID all FMB}}</div>
 </div></td>
          <td style="text-align: center;">Common commands</td>
@@ Line 595: / Line 610: @@
      </tr>
   <tr>
-         <td style="text-align: center;">''auto_calibrate:set''</td>
+         <td style="text-align: center;">''auto_calibrate:get''</td>
          <td style="text-align: left;">Returns the state of calibration.</td>
          <td style="text-align: center;">Yes</td>
@@ Line 622: / Line 637: @@
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
+<div class="mw-customtoggle-33" style="margin:0 auto; text-align: center; overflow:auto;">
+FMBXXX
+<span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB}}</span>
+</div></td>
+        <td style="text-align: center;">Commands related to features</td>
+    </tr>
+ <tr>
+    </tr>
+ <tr>
+        <td style="text-align: center;">''[[FMB go2sleep|go2sleep]]''</td>
+        <td style="text-align: left;">Puts device to sleep ignoring going to sleep condition and stays asleep for the set time.<br>
+<font size="-2"><strong>Note: This command is supported from 03.27.10.Rev.482  firmware version.</strong></font></td>
+        <td style="text-align: center;">Yes</td>
+        <td style="text-align: center;">[[FMB965]]
+[[FMB930]]</td>
 <div class="mw-customtoggle-33" style="margin:0 auto; text-align: center; overflow:auto;">
 FMBXXX
@@ Line 633: / Line 663: @@
 X=0 – Stops Tracking on Demand functionality.<br />
 X=1 – Starts Tracking on Demand functionality.<br />
-X=2 – Generates one high priority record and inititates data sending to server.<br />
+X=2 – Generates one high priority record and inititates data sending to server.<br>
-<br />
 <font size="-2"><strong>Note: This command is supported from 03.25.06 firmware version.</strong></font></td>
          <td style="text-align: center;">Yes</td>
@@ Line 658: / Line 687: @@
   <tr>
          <td style="text-align: center;">''[[FMB obdinfo|obdinfo]]''</td>
-         <td style="text-align: left;">If connected with Bluetooth OBD dongle displays all available information from OBD.</td>
+         <td style="text-align: left;">Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all available information from OBD.</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 669: / Line 698: @@
   <tr>
          <td style="text-align: center;">''[[FMB faultcodes|faultcodes]]''</td>
-         <td style="text-align: left;">If connected with Bluetooth OBD dongle display all visible fault codes.</td>
+         <td style="text-align: left;">Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays all visible fault codes.</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 680: / Line 709: @@
   <tr>
          <td style="text-align: center;">''cleardtc''</td>
-         <td style="text-align: left;">Clears all vehicle stored fault codes.</td>
+         <td style="text-align: left;">Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Command clears all vehicle stored fault codes.</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 691: / Line 720: @@
   <tr>
          <td style="text-align: center;">''getvin''</td>
-         <td style="text-align: left;">Get vehicle VIN code, if OBD dongle is connected.</td>
+         <td style="text-align: left;">Command works on OBD trackers with data reading capabilities (FMX00Y). On other trackers it works only if connected with Bluetooth OBD dongle. Response displays vehicle VIN code.</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 767: / Line 796: @@
 FMBXXX
 <span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_CAN}}</span>
+</div></td>
 </div></td>
          <td style="text-align: center;">CAN Adapter Commands</td>
      </tr>
-{{{FMB140_SMS| <tr>
+ <tr>
-         <td style="text-align: center;">''allcanmode''</td>
+         <td style="text-align: center;">''[[FMB lvcanfaultcodes|lvcanfaultcodes]]''</td>
-         <td style="text-align: left;">Turn on ALL-CAN300 mode.</td>
+         <td style="text-align: left;">Read DTC fault codes.</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
-<div class="mw-customtoggle-47" style="margin:0 auto; text-align: center; overflow:auto;">
+<div class="mw-customtoggle-49" style="margin:0 auto; text-align: center; overflow:auto;">
 FMBXXX
 <span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_CAN}}</span>
@@ Line 782: / Line 812: @@
      </tr>
   <tr>
-         <td style="text-align: center;">''lvcanmode''</td>
+         <td style="text-align: center;">''lvcanopenalldoors''</td>
-         <td style="text-align: left;">Turn on LV-CAN200 mode.</td>
+         <td style="text-align: left;">Toggle CAN-CONTROL to open [unlock] all doors</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
-<div class="mw-customtoggle-48" style="margin:0 auto; text-align: center; overflow:auto;">
+<div class="mw-customtoggle-50" style="margin:0 auto; text-align: center; overflow:auto;">
 FMBXXX
 <span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_CAN}}</span>
@@ Line 793: / Line 823: @@
      </tr>
   <tr>
-         <td style="text-align: center;">''[[FMB lvcanfaultcodes|lvcanfaultcodes]]''</td>
+         <td style="text-align: center;">''lvcanclosealldoors''</td>
-         <td style="text-align: left;">Read DTC fault codes.</td>
+         <td style="text-align: left;">Toggle CAN-CONTROL to close [lock] all doors</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
-<div class="mw-customtoggle-49" style="margin:0 auto; text-align: center; overflow:auto;">
+<div class="mw-customtoggle-51" style="margin:0 auto; text-align: center; overflow:auto;">
 FMBXXX
 <span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_CAN}}</span>
@@ Line 804: / Line 834: @@
      </tr>
   <tr>
-         <td style="text-align: center;">''lvcanopenalldoors''</td>
+         <td style="text-align: center;">''lvcanopentrunk''</td>
-         <td style="text-align: left;">Toggle CAN-CONTROL to open [unlock] all doors</td>
+         <td style="text-align: left;">Toggle CAN-CONTROL to open [unlock] trunk</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
-<div class="mw-customtoggle-50" style="margin:0 auto; text-align: center; overflow:auto;">
+<div class="mw-customtoggle-52" style="margin:0 auto; text-align: center; overflow:auto;">
 FMBXXX
 <span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_CAN}}</span>
@@ Line 815: / Line 845: @@
      </tr>
   <tr>
-         <td style="text-align: center;">''lvcanclosealldoors''</td>
+         <td style="text-align: center;">''lvcanblockengine''</td>
-         <td style="text-align: left;">Toggle CAN-CONTROL to close [lock] all doors</td>
+         <td style="text-align: left;">Toggle CAN-CONTROL to block vehicle engine (''if command is '''not''' supported, please, visit [[Immobilizing_and_locking_issues_using_CAN-Control_with_Immobilizer|FAQ]]'')</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
-<div class="mw-customtoggle-51" style="margin:0 auto; text-align: center; overflow:auto;">
+<div class="mw-customtoggle-52" style="margin:0 auto; text-align: center; overflow:auto;">
 FMBXXX
 <span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_CAN}}</span>
 </div></td>
          <td style="text-align: center;">CAN Adapter Commands</td>
-    </tr>
+   </tr>
   <tr>
-         <td style="text-align: center;">''lvcanopentrunk''</td>
+         <td style="text-align: center;">''lvcanunblockengine''</td>
-         <td style="text-align: left;">Toggle CAN-CONTROL to open [unlock] trunk</td>
+         <td style="text-align: left;">Toggle CAN-CONTROL to unblock vehicle engine (''if command is '''not''' supported, please, visit [[Immobilizing_and_locking_issues_using_CAN-Control_with_Immobilizer|FAQ]]'')</td>
          <td style="text-align: center;">Yes</td>
          <td style="text-align: center;">
@@ Line 848: / Line 878: @@
 </div></td>
          <td style="text-align: center;">CAN Adapter Commands</td>
-    </tr>}}}
   <tr>
-         <td style="text-align: center;">''[[FMB lvcansetting|lvcansetting:]]#,#''</td>
+        <td style="text-align: center;">''[[FMB lvcanhorn|lvcanhorn]]''</td>
+        <td style="text-align: left;">Toggle CAN-CONTROL to activate single horn sound <br />
+</td>
+        <td style="text-align: center;">Yes</td>
+        <td style="text-align: center;">
+<div class="mw-customtoggle-53" style="margin:0 auto; text-align: center; overflow:auto;">
+FMBXXX
+<span class="mw-collapsible mw-collapsed">{{Template:FMB_AVL_ID_all_FMB_with_CAN}}</span>
+</div></td>
+        <td style="text-align: center;">CAN Adapter Commands</td>
+    </tr>
+ <tr>
+         <td style="text-align: center;">''[[FMB lvcansetting|lvcansetting]]#,#''</td>
          <td style="text-align: left;">This command is used to set specific counters for vehicles. From that moment of setting the value, vehicle will continue to count from the specified value. <br />
 .#: <br />
 – setting total engine work time (seconds) <br />
 – setting total mileage of the vehicle (km) <br />
-– setting total fuel consumption (liters) <br />
+– resetting total fuel consumption to 0 is available (liters) <br />
 – setting total CNG use (kg) <br />
 – setting electric engine work time (seconds) <br />
@@ Line 865: / Line 906: @@
          <td style="text-align: center;">CAN Adapter Commands</td>
      </tr>
+<tr>
+        <td style="text-align: center;">''[[FMB lvcanrefresh|lvcanrefresh]]''</td>
+        <td style="text-align: left;">This command forces FMB1YX connection to FOTA WEB to report current CAN adapter status. <br />
+<font size="-2"><strong>Note: This command is supported from 03.25.16.Rev.281 firmware version.</strong></font></td>
+        <td style="text-align: center;">Yes</td>
+        <td style="text-align: center;">[[FMB140]]</td>
+        <td style="text-align: center;">CAN Adapter Commands</td>
+    </tr>
+<tr>
+        <td style="text-align: center;">''[[FMB lvcanreset|lvcanreset]]''</td>
+        <td style="text-align: left;">This command forces CAN adapter reset. <br />
+<font size="-2"><strong>Note: This command is supported from 03.25.16.Rev.281 firmware version.</strong></font></td>
+        <td style="text-align: center;">Yes</td>
+        <td style="text-align: center;">[[FMB140]]</td>
+        <td style="text-align: center;">CAN Adapter Commands</td>
+    </tr>
+<tr>
+        <td style="text-align: center;">''[[FMB lvcancheck|lvcancheck]]''</td>
+        <td style="text-align: left;">This command reports CAN lines connection information. <br />
+<font size="-2"><strong>Note: This command is supported from 03.25.16.Rev.281 firmware version.</strong></font></td>
+        <td style="text-align: center;">Yes</td>
+        <td style="text-align: center;">[[FMB140]]</td>
+        <td style="text-align: center;">CAN Adapter Commands</td>
+    </tr>
+</table>
 </table>