Difference between revisions of "FM36M1 SMS/GPRS command list"
From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{Template:FM36_SMS_Command_List|model=FM36M1}}") |
m (Protected "FM36M1 SMS/GPRS command list" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Template:FM36_SMS_Command_List|model=FM36M1}} | {{Template:FM36_SMS_Command_List|model=FM36M1}} | ||
| + | [[Category:FM36M1 Manual]] | ||
Latest revision as of 11:57, 27 May 2019
Main Page > EOL Products > FM36M1 > FM36M1 Manual > FM36M1 SMS/GPRS command listAll commands are case sensitive. While FM36M1 operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to FM36M1 device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). FM36M1 will receive the SMS when it wakes up (exits deep sleep mode).
| Command | Description | Response |
|---|---|---|
| getstatus | Modem Status information | Yes |
| getweektime | Current device time, Day of Week and amount of minutes passed since start of week | Yes |
| getops | List of currently available GSM operator | Yes |
| getcfgtime | Date and Time of last successful configuration | Yes |
| ggps | Google Map Link information | Yes |
| getgps | Current GPS data and time | Yes |
| cpureset | Reset CPU | No |
| resetprof | Reset all FLASH1 profile configuration to default profile | No |
| getver | Device / Modem / Code version information | Yes |
| getinfo | Device runtime system information | Yes |
| getimeiccid | Returns IMEI, CCID | Yes |
| deleterecords | Delete all records saved on FLASH | No |
| getio | Readout digital inputs and outputs | Yes |
| readio # | Readout digital input value according entered ID, # - ID value | Yes |
| setdigout ## Y1 Y2# | set digital outputs 0 – OFF, 1 – ON Y1 – timeout for DO1 Y2 – timeout for DO2 |
Yes |
| getparam # | Readout parameter value according entered ID. # - ID value. |
Yes |
| setparam # # | Set parameter value according entered ID and Value. 1.# - ID value. 2.# - New Parameter Value |
Yes |
| getparam 1271 X | X values can be 1, 2, 3 | Yes |
| setparam 1271 X/212 X | If X is from 0 to 49, X means index of operator code which has to be configured. | Yes |
| flush #,#,#,#,#,#,# | Initiates all data sending to specified target server 1.# - IMEI 2.# - APN 3.# - LOGIN 4.# - PASS 5.# - IP 6.# - PORT 7.# - MODE (0-TCP/1-UDP) |
No |
| setkey # # | Add new or change current configuration keyword. If device is locked, keyword cannot be changed 1.# - old keyword (if adding new keyword space |
Yes |
| delkey # | Remove existing keyword. (If device is locked, keyword cannot be changed) # - old keyword |
Yes |
| readops # | 1 – send first 20 operator codes, 2 – send from 21st to 40th operator codes, 3 – send all other operator codes | |
| sn # | Static navigation, 1 – enable, 0 – disable | Yes |
| banlist | Banned operators information | Yes |
| crashlog | Device last information before unexpected reset | Yes |
| delete_all_sms | Deletes all SMS | No |
| lvcangetprog | CAN Program Number request by SMS | Yes |
| lvcansetprog # | Set LVCAN program number | Yes |
| lvcangetinfo | Get LV-CAN info by SMS | Yes |
